LONGER
LONGER RAY5 10W Laser Engraver with Air Assist Kit
A 10W laser engraver with a 0.06 mm spot, 10,000 mm/min speed, 400×400 mm bed and air assist cuts 20 mm wood and 30 mm acrylic
- Ultra-fine detail from a 0.06 mm laser spot
- Cuts 20 mm wood and 30 mm acrylic in one pass
- 400 × 400 mm bed handles large projects
- 10 000 mm/min top speed accelerates production
- 32-bit controller with Wi-Fi, USB, TF card and 3.5-inch touchscreen for offline use
Laser engraver for makers and small workshops
The LONGER RAY5 is a 10W diode laser engraver designed for hobbyists and small workshops that need precise marking and cutting on wood, acrylic, glass and metal. It provides a 400 x 400 mm work area, matching the stated 15.7 inch square envelope. Offline control is handled through a 3.5 inch touchscreen or TF card, while Wi-Fi and USB give additional ways to send jobs without a permanent PC link.
Air-assisted cutting keeps optics clean
An included air assist kit blows debris away from the cut line, reducing flare and keeping the 0.06 mm laser spot focused during long runs. The 32-bit motherboard drives the dual-beam module at up to 10000 mm per minute, so thick 20 mm wood or 30 mm acrylic sheets are sliced in fewer passes with less heat buildup. Forced air also lowers the risk of residue baking onto the lens, extending the time between manual cleaning.
Rigid frame and flexible connectivity suit daily use
The gantry is built to stay square across the full 400 mm travel, so repeated jobs hold tolerance without frequent re-alignment. Four data paths — Wi-Fi, USB cable, TF card and the onboard touchscreen — let operators choose the most convenient workflow: queue files wirelessly from a phone app, run a card untethered, or plug in for bulk transfers. Buyers who need a larger bed, higher optical power for faster throughput, or an enclosed cabinet for fume extraction should look at other models.
Highlights
- Ultra-fine detail from a 0.06 mm laser spot
- Cuts 20 mm wood and 30 mm acrylic in one pass
- 400 × 400 mm bed handles large projects
- 10 000 mm/min top speed accelerates production
- 32-bit controller with Wi-Fi, USB, TF card and 3.5-inch touchscreen for offline use
Specifications
No published specifications for this item yet.
Questions about this item
How do I set up the LONGER RAY5 10W laser engraver and what is the common mistake with the 0.06mm spot?
Place the machine on a stable surface, connect power, and use the 3.5-inch touchscreen or app to run the focus routine until the spot measures 0.06mm*0.06mm. The step many users miss is skipping the fine-focus test on a scrap piece before the first real job.
What maintenance or replacement will the 10W laser module and air assist kit need over time?
Clean the lens and nozzle weekly with isopropyl alcohol to keep the 0.06mm spot sharp. Replace the air-assist filter when airflow drops, and plan on a new diode module after the rated hours when cutting depth on 20mm wood or 30mm acrylic noticeably falls.
What limit appears first during a long engraving run at 10000mm/min on the 400*400mm bed?
The diode temperature limit is reached first. Sustained 10W output at 10000mm/min heats the module faster than the built-in fan can cool it, so the controller will pause or reduce power to protect the laser before the 32-bit motherboard or motion system hits any limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
