Logico
Logico COX3102 RG6 Coaxial Cable CCS 18AWG Dual Shield 1000ft Black
RG6 coaxial cable with dual shielding and 18 AWG copper-clad steel conductor for digital TV and satellite runs up to 3.0 GHz
- TypeVideo & Power Cable
- RG6U dual shield supports signals up to 3.0 GHz
- 18 AWG solid copper-clad steel conductor ensures reliable transmission
- Bonded aluminum foil plus 60% aluminum braid blocks interference
- 1000 ft pull box simplifies long-run installations
- PVC CM-rated jacket adds flame-retardant protection
RG6 Coaxial Cable for HDTV and Satellite
The LOGICO COX3102 is an RG6/U dual-shield coaxial cable built for digital HDTV, CATV and satellite installations. Its 18 AWG copper-clad steel conductor and gas-injected foam polyethylene insulation suit residential and commercial distribution runs. The PVC CM-rated jacket is flame-retardant and rated for in-wall use.
Dual Shield Construction and Frequency Headroom
A bonded aluminum foil shield plus a 60 percent aluminum braid with 80 wires provides two layers of interference protection. The cable is sweep-tested to 3.0 GHz, giving headroom for current digital channels and broadband signals. Attenuation increases with run length, so very long drops beyond the 1000-foot spool may need amplification.
1000-Foot Pull Box for Continuous Runs
The 1000-foot (305-meter) length arrives in a black pull-box for easy dispensing during installation. This single continuous length eliminates splice points that can degrade signal quality on long runs. Projects requiring multiple shorter segments or plenum-rated jacket will need a different cable type.
Highlights
- RG6U dual shield supports signals up to 3.0 GHz
- 18 AWG solid copper-clad steel conductor ensures reliable transmission
- Bonded aluminum foil plus 60% aluminum braid blocks interference
- 1000 ft pull box simplifies long-run installations
- PVC CM-rated jacket adds flame-retardant protection
Specifications
| Brand | LOGICO |
|---|---|
| Model | COX3102 |
| Type | Video & Power Cable |
Questions about this item
Will the 18 AWG copper-clad steel centre conductor work with my existing F-type compression connectors?
Yes — the solid 1.02 mm CCS conductor matches standard RG6 dimensions, so common F-type compression or crimp connectors seat correctly without special tooling.
How can I verify the dual shield is intact after I pull the 1000 ft through conduit?
Inspect the jacket for kinks, then use a cable tester to confirm continuity on the centre conductor and shield; a clean sweep to 3.0 GHz with low return loss shows both the bonded foil and 60 % aluminum braid are undamaged.
Does the pull-box contain only the coaxial cable or are connectors and grounding blocks included?
The box supplies 1000 ft of RG6 dual-shield coax with a CM-rated PVC jacket; F-type connectors, grounding blocks and any termination hardware must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



