Logico
Logico COX3101 RG6 Dual Shield Coaxial Cable 1000ft White
RG6 dual-shield coaxial cable with 18 AWG copper-clad steel conductor, 60% aluminum braid and bonded foil shielding rated to 3.0 GHz, supplied in a 1,000 ft pull box
- TypeVideo & Power Cable
- Supports 3.0 GHz signals for digital HDTV and satellite
- Dual shielding with bonded foil and 60% aluminum braid blocks interference
- 18 AWG solid copper-clad steel conductor ensures reliable transmission
- Flame-retardant CM-rated PVC jacket safe for in-wall runs
- 1000-foot pull box provides ample length for large installations
RG6 Dual Shield Coaxial Cable
The Logico COX3101 is a 1000-foot RG6/U dual shield coaxial cable built for digital HDTV, CATV and satellite installations. It uses an 18 AWG solid copper-clad steel conductor with gas-injected foam polyethylene insulation. The white PVC jacket is flame-retardant and CM rated for in-wall runs.
Thermals noise and power draw
As a passive coaxial cable the product generates no heat, produces no audible noise and draws no electrical power during normal operation. Signal attenuation characteristics follow the physical properties of the 18 AWG copper-clad steel centre conductor and dual shielding layers. No active cooling or external power supply is required.
3.0 GHz bandwidth rating
The cable is specified to 3.0 GHz, which determines whether it will carry the full frequency range required by modern digital satellite and broadband services. Installations needing higher bandwidth or a solid copper centre conductor should select a different specification.
Highlights
- Supports 3.0 GHz signals for digital HDTV and satellite
- Dual shielding with bonded foil and 60% aluminum braid blocks interference
- 18 AWG solid copper-clad steel conductor ensures reliable transmission
- Flame-retardant CM-rated PVC jacket safe for in-wall runs
- 1000-foot pull box provides ample length for large installations
Specifications
| Brand | LOGICO |
|---|---|
| Part Number | COX3101 |
| Type | Video & Power Cable |
Questions about this item
How do I install this RG6 coaxial cable and what step do people usually get wrong?
Pull the 1000 ft cable from the box, strip the jacket to expose the 18 AWG copper-clad steel conductor, foil and 60 % braid, then crimp an F-type connector; the step often missed is trimming the foil flush before seating the connector so the braid makes full contact.
What maintenance or replacement will this cable need over time?
The PVC CM-rated jacket and gas-injected foam polyethylene insulation are rated for indoor use; inspect the white jacket annually for cracks or kinks, and replace any section where the foil or 60 % aluminum braid has been crushed or corroded.
What limit appears first when this cable runs at its 3.0 GHz rating for long periods?
The 18 AWG copper-clad steel conductor has higher resistance than solid copper, so attenuation rises with length and temperature; on runs approaching the full 1000 ft the signal loss at 3.0 GHz becomes the limiting factor before the dual shield fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony SNCCX600 network camera 1280 x 720 30 fps
- IPv4 TCP UDP ARP IC…
- Cable



