Loctite
Loctite HY 4070 Hybrid Gel Adhesive 10 Ml Cartridge Clear 10 Pack
A two-part hybrid gel adhesive that bonds plastics, rubbers and metals with fast fixture and non-sag performance, supplied as ten 10 ml cartridges
- TypeScissors
- Fast fixture at room temperature speeds assembly
- Hybrid gel bonds plastics, rubbers and metals
- Non-sag gel stays in place on vertical surfaces
- Two-part curing delivers full strength over time
- Pack of 10 cartridges keeps supply ready
Hybrid Gel Adhesive Pack
Loctite HY 4070 is a two-part hybrid gel adhesive supplied as ten 10 ml cartridges. It bonds most plastics, rubbers and metals with a transparent, non-sag formula. The gel consistency prevents flow on vertical surfaces. Curing begins when Part A and Part B are mixed, delivering rapid handling strength.
Ten-Cartridge Supply
The pack provides ten individual cartridges for repeated or larger bonding tasks. Each cartridge contains the two components needed for mixing. This quantity supports multiple assembly or repair jobs without opening bulk containers. Users can store unopened cartridges for future use.
Mixing Required
Installation requires mixing the two components before application. The non-sag gel stays in place during positioning on vertical areas. Incomplete mixing can prevent full cure and reduce bond strength. Excess adhesive must be removed before it hardens to avoid visible residue.
Highlights
- Fast fixture at room temperature speeds assembly
- Hybrid gel bonds plastics, rubbers and metals
- Non-sag gel stays in place on vertical surfaces
- Two-part curing delivers full strength over time
- Pack of 10 cartridges keeps supply ready
Specifications
| Brand | Loctite |
|---|---|
| Type | Scissors |
Questions about this item
Will the mixed adhesive need any special storage or replacement once the two parts are combined?
The adhesive is supplied as separate Part A and Part B cartridges; once mixed, the material cures and cannot be stored for later use. Each cartridge is single-use after mixing.
What limits the working time when applying this hybrid gel on a large project?
The gel achieves handling strength rapidly after mixing the two components, so the fixture window is the practical limit for repositioning parts during assembly.
Does the adhesive generate noticeable heat or fumes during a full day of continuous bonding tasks?
Curing starts at room temperature when the parts are mixed; the process is exothermic but the gel consistency limits flow and the product is designed for normal workshop ventilation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
