We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear 4 oz Loctite 404 instant adhesive bottle

Loctite

Loctite 404 Instant Adhesive 234044 Clear 4 oz

SKU CH-EPQE-XQ77C

Clear instant adhesive bonds metal, plastic and rubber with 70 to 110 cps viscosity and 0.005 in gap fill

  • ColorClear
  • Low viscosity for fast penetration into tight joints
  • Bonds metal, plastic and rubber in one formulation
  • Clear cure leaves no visible residue on finished parts
  • Moisture-activated cure requires no mixing or heat
  • Gap fill to 0.005 in suits close-fitting assemblies

Loctite 404 Instant Adhesive 4 oz

Loctite 404 is a clear, low-viscosity instant adhesive supplied in a 4 fl oz bottle. It bonds metal, plastic and rubber using a moisture-cure mechanism. The formulation suits general maintenance, repair and assembly tasks where rapid fixturing is required.

Gap fill limited to 0.005 in

The adhesive fills gaps up to 0.005 in and flows at a viscosity between 70 and 110 cps. It is electrically insulating and rated for interior use only. No built-in dispenser is included, so application method must be chosen separately.

Upgrades from slower-setting glues for tight

This product replaces slower-setting adhesives when bonding rubber or other substrates with very small clearances. The jump is worth it when cure speed and thin-film strength matter more than impact resistance or exterior durability. Compatible accelerator Loctite SF 712 is available separately.

Highlights

  • Low viscosity for fast penetration into tight joints
  • Bonds metal, plastic and rubber in one formulation
  • Clear cure leaves no visible residue on finished parts
  • Moisture-activated cure requires no mixing or heat
  • Gap fill to 0.005 in suits close-fitting assemblies

Specifications

BrandLoctite
ColorClear

Questions about this item

Should I pick the 4 oz bottle or a different size for general rubber and plastic repairs?

The 4 fl oz bottle suits frequent use on rubber, metal and plastic; smaller bottles are better for occasional jobs, while larger containers match high-volume production.

What does the 70–110 cps viscosity range mean when the adhesive is applied?

That low-viscosity range lets the liquid flow into gaps up to .005 in and cure quickly on tight-fitting rubber, plastic and metal parts.

How does the moisture-cure method limit bond strength in practice?

Cure starts on contact with surface moisture, so bond speed depends on humidity and substrate porosity; the adhesive is rated for interior use only.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.