Loctite
Loctite 338130 Rubber Protectant Color Guard Red 14.5 fl oz Sprayer
Rubber protectant spray guards surfaces in red with a 14.5 fl oz capacity and 4-hour dry time
- TypeConstruction Film
- Red color guard protects rubber surfaces
- VOC content 0.74 g/L meets USDA standards
- Dry time 4 hours at application temperature -30 to 200 Degrees F
- Dielectric strength 11.8 kV/mm insulates electrical components
- 5 fl oz sprayer covers concrete, metal, wood and plastics
Rubber Protectant Color Guard Red
Loctite 338130 is a red rubber protectant formulated as a construction film for automotive and general maintenance. It comes in a 14.5 fl oz sprayer and is rated for use on concrete, epoxy glass, fabric, fiberglass, foam, glass, masonry, metal, most plastics, rubber and wood.
Sprayer application and material compatibility
The sprayer delivers the protectant directly onto prepared surfaces without additional tools, freeing the user from brushes or rollers. It adheres to the listed substrates and meets USDA standards, so it fits into workflows that require compliant coatings on rubber and mixed-material assemblies.
Sustained exposure and dielectric performance
The film maintains integrity across an application temperature range of -30 to 200 degrees F and provides a dielectric strength of 11.8 kV/mm for electrical insulation. VOC content is 0.74 g/L and dry time is 4 hr, supporting consistent barrier properties during extended service. California Proposition 65 applies.
Highlights
- Red color guard protects rubber surfaces
- VOC content 0.74 g/L meets USDA standards
- Dry time 4 hours at application temperature -30 to 200 Degrees F
- Dielectric strength 11.8 kV/mm insulates electrical components
- 5 fl oz sprayer covers concrete, metal, wood and plastics
Specifications
| Brand | LOCTITE |
|---|---|
| Type | Construction Film |
Questions about this item
Will the coating handle continuous exposure near 200 °F?
The protectant is rated for application temperatures from -30 °F up to 200 °F, so sustained heat at the upper end stays within its specified range.
Does the spray produce strong fumes or heat during all-day use?
VOC content is only 0.74 g/L, indicating very low emissions, and the product does not generate its own heat during application.
What surface preparation or primer is required before spraying?
The protectant adheres directly to rubber, metal, wood, concrete, glass, fabric, foam, fiberglass, masonry and most plastics without a separate primer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
