Loctite
Loctite 209714 Activator SF 7387 Light Brown 4.5 fl oz Aerosol
Speeds acrylic adhesive cure with a heptane and isopropanol aerosol activator in a 4.5 fl oz can
- TypeSealing Compound
- Speeds adhesive cure with SF 7387 activator formula
- 5 fl oz aerosol delivers controlled application
- Heptane/isopropanol base flashes at 24.8 °F
- Meets OSHA hazard communication standard 29 CFR 1910.1200
- Low 1.5 cps viscosity penetrates joints quickly
Loctite SF 7387 Activator 4.5 fl oz
Loctite SF 7387 is a heptane and isopropanol based activator supplied in a 4.5 fl oz aerosol can. It is formulated to accelerate the cure speed of compatible acrylic adhesives. The product is intended for assembly and maintenance tasks where faster fixture times are required. It is applied before bonding to prepare the adhesive surface.
Capacity and cure acceleration
The 4.5 fl oz container provides sufficient volume for multiple applications across a workshop or production line. The activator reduces the time needed for acrylic adhesives to reach handling strength, improving throughput on repetitive bonding jobs. It does not dry itself, so the adhesive remains workable until parts are joined. Very large surface areas or high-volume automation may consume the can quickly.
Aerosol delivery and safety profile
The aerosol format allows a thin, even coating without brushes or dispensers, reducing waste and keeping hands clean. The base mixture gives a specific gravity of .77 and a viscosity of 1.5 cps for consistent spray performance. The cured adhesive appears yellow, confirming activation visually. The flash point is 24.8 Degrees F and VOC content is 645.1 g/L, requiring good ventilation and ignition-source control during use.
Highlights
- Speeds adhesive cure with SF 7387 activator formula
- 5 fl oz aerosol delivers controlled application
- Heptane/isopropanol base flashes at 24.8 °F
- Meets OSHA hazard communication standard 29 CFR 1910.1200
- Low 1.5 cps viscosity penetrates joints quickly
Specifications
| Type | Sealing Compound |
|---|---|
| Brand | LOCTITE |
Questions about this item
Will the Loctite SF 7387 activator work with the acrylic adhesives I already use?
Yes, the SF 7387 series is formulated for use on acrylic adhesive types to speed cure time.
How can I confirm the Loctite 209714 activator is applying correctly after setup?
The product is a light brown aerosol with a specific gravity of .77 and viscosity of 1.5 cps; it does not dry but accelerates adhesive curing.
What comes with the Loctite 209714 activator and what else is needed?
The box contains a 4.5 fl oz aerosol can of heptane/isopropanol-based activator; the acrylic adhesive to be accelerated is sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
