We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Loctite 290 wicking threadlocker in a 1.69 fl oz bottle

Loctite

Loctite 135392 Wicking Threadlocker 290 Green 1.69 fl oz

SKU CH-0FTF-BGEDK

Medium-strength green threadlocker wicks into assembled fasteners up to 1/2 in diameter and cures anaerobically in 20 minutes

  • ColorGreen
  • Wicks into pre-assembled fasteners without disassembly
  • Medium strength holds 90 in-lb breakaway torque
  • Anaerobic cure locks threads in 20 minutes
  • Green 290 formula meets ASTM D-5363 and MIL-S-46163-A
  • 69 fl oz bottle treats up to 1/2 in threads

Loctite 290 Green Threadlocker

Loctite 290 is a green wicking threadlocker designed for maintenance and repair technicians who need to secure pre-assembled fasteners without disassembly. The anaerobic formula penetrates threads by capillary action and provides medium-strength locking on brass, bronze, copper, iron, manganese, Monel, nickel and steel up to 1/2 in diameter.

Medium-strength cure with 20-minute work time

The adhesive develops a breakaway torque of 90 in-lb after full anaerobic cure and remains workable for 20 minutes during assembly. Supplied in a 1.69 fl oz bottle, it meets ASTM D-5363 and MIL-S-46163-A standards and is compatible with Loctite 7649 primer for faster curing on inactive metals.

Wicking grade for assembled fasteners only

This product is not for buyers who need a threadlocker applied before assembly or who require high-strength permanent locking on large-diameter bolts. The wicking property is specific to post-assembly penetration and cannot replace standard liquid grades for through-hole applications.

Highlights

  • Wicks into pre-assembled fasteners without disassembly
  • Medium strength holds 90 in-lb breakaway torque
  • Anaerobic cure locks threads in 20 minutes
  • Green 290 formula meets ASTM D-5363 and MIL-S-46163-A
  • 69 fl oz bottle treats up to 1/2 in threads

Specifications

BrandLoctite
ColorGreen

Questions about this item

How do I apply the 290 threadlocker so the 20 min working time is not wasted?

Shake the 1.69 fl oz bottle, then apply a few drops directly onto the engaged threads of fasteners up to 1/2 in diameter; the anaerobic cure starts only when air is excluded, so assemble immediately and avoid repositioning after the 20 min window closes.

Will the cured 290 bond need re-application or primer refresh over time?

Once cured to the 90 in-lb breakaway torque on brass, bronze, copper, iron, manganese, monel, nickel or steel, the bond is permanent unless the joint is heated above the anaerobic adhesive's degradation temperature; primer 7649 is only required for inactive metals or faster cure, not for routine maintenance.

What is the first limitation I will hit if the assembly sees continuous vibration and heat?

The medium-strength formulation meets ASTM D-5363 and MIL-S-46163-A, but sustained temperatures approaching the anaerobic chemistry's upper service limit will reduce the 90 in-lb breakaway torque before mechanical fatigue becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.