We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small purple bottle of Loctite 222MS threadlocker tape 10 mL

Loctite

Loctite 135333 222MS Purple Threadlocker Tape 10 mL

SKU CH-CSNZ-1PZ7W

Low-strength anaerobic threadlocker tape for small fasteners up to 1/4 in, cures in 20 minutes with 25 in-lb breakaway torque

  • ColorPurple
  • Low-strength threadlocking for easy disassembly
  • Purple colour identifies low-strength formula instantly
  • 10 mL bottle covers many small fasteners
  • Anaerobic cure locks threads in 20 minutes
  • Meets Mil-S-46163-A Type II Grade M specification

Low-Strength Purple Threadlocker Tape

Loctite 135333 222MS is an anaerobic threadlocking tape supplied in a 10 mL bottle. The purple colour identifies its low-strength formulation designed for small fasteners. It cures in the absence of air between metal threads to prevent loosening from vibration.

Suited for Brass, Bronze, Copper.

This product suits maintenance tasks on small brass, bronze, copper, iron, manganese, Monel, nickel or steel fasteners where occasional disassembly with hand tools is required. It is not intended for high-strength locking or for fasteners larger than the stated maximum thread diameter.

Breakaway Torque 25 in-lb and 20 min Working Time

The adhesive develops a breakaway torque of 25 in-lb after full anaerobic cure, confirming its low-strength rating. A 20 minute working time allows repositioning during assembly before the curing process begins. Meets Mil-S-46163-A Type II Grade M.

Highlights

  • Low-strength threadlocking for easy disassembly
  • Purple colour identifies low-strength formula instantly
  • 10 mL bottle covers many small fasteners
  • Anaerobic cure locks threads in 20 minutes
  • Meets Mil-S-46163-A Type II Grade M specification

Specifications

BrandLoctite
ColorPurple

Questions about this item

How long does the Loctite 222MS threadlocker tape remain workable before it starts to cure?

The product provides a working time of 20 minutes before anaerobic curing begins on threaded fasteners.

What is the maximum breakaway torque the cured adhesive can hold on a 1/4 inch bolt?

The low-strength formula delivers a breakaway torque of 25 in-lb on fasteners up to 1/4 inch diameter.

Does the anaerobic threadlocker generate noticeable heat or fumes during a full day of assembly work?

The oleic acid based adhesive cures at room temperature without exothermic reaction or strong odour during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.