We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear liquid accelerator in a small bottle

Loctite

Loctite 135316 SF 712 Accelerator 1.75 fl oz

SKU CH-R1CG-XT9VY

Solvent-based accelerator speeds instant-adhesive cure to under 30 seconds in a 1.75 fl oz bottle

  • TypeCloth Tape
  • ColorClear
  • Speeds cure in under 30 seconds
  • Clear cured finish leaves no visible residue
  • Solvent-based formula with 0.79 specific gravity
  • Meets CFIA and MIL-A-46050C standards
  • 75 fl oz bottle for precise application

Product Identity

Loctite 135316 SF 712 Accelerator is a solvent-based promoter supplied in a 1.75 fl oz bottle. It is intended for technicians and assemblers who need to reduce the fixture time of instant adhesives during production or repair tasks.

Container and Handling

The clear liquid comes in a bottle that allows controlled dispensing onto bond lines. With a specific gravity of 0.79 and viscosity of 1 cps it flows easily, while a flash point of 53.6 degrees Fahrenheit means the work area must be kept away from ignition sources during use.

Cure Speed Determinant

On-part life is limited to 1 minute and dry time is less than 30 seconds, so the accelerator must be applied immediately before joining parts. Buyers who need a longer open time or a non-solvent formulation should select a different product.

Highlights

  • Speeds cure in under 30 seconds
  • Clear cured finish leaves no visible residue
  • Solvent-based formula with 0.79 specific gravity
  • Meets CFIA and MIL-A-46050C standards
  • 75 fl oz bottle for precise application

Specifications

TypeCloth Tape
BrandLoctite
ColorClear

Questions about this item

What adhesive type does the SF 712 accelerator work with?

The SF 712 accelerator is formulated for use on instant adhesives, speeding their cure time to less than 30 seconds.

What are the container size and type for this accelerator?

The product ships in a 1.75 fl oz bottle, providing a solvent-based accelerator with a specific gravity of 0.79.

How is the accelerator applied and what timing mistake should be avoided?

Apply the accelerator to the bonded parts; the on-part life is 1 minute, so the adhesive must be assembled within that window.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.