Lockjaw
Lockjaw 15-043805 Synthetic Shackle 1-1/4 in Pin
Synthetic soft shackle with 14,333 lb working load limit and 43,000 lbf breaking strength for corrosion-resistant pulling
- Synthetic construction resists corrosion and UV damage
- Working load limit of 14,333 lb for heavy tasks
- Breaking strength reaches 43,000 lbf for safety margin
- Anodized coating adds extra surface protection
- Nylon cover shields HMPE rope from abrasion
1-1/4 in Pin Synthetic Shackle
The Lockjaw 15-043805 is a synthetic shackle with a 1-1/4 in pin diameter designed for pulling and conveying tasks. It suits riggers and vehicle recovery operators who need a corrosion-resistant, UV-resistant connection point. The anodized coating and nylon cover protect the HMPE rope during use. It is not rated for overhead lifting applications.
Working Load Limit 14,333 lb
The shackle offers a working load limit of 14,333 lb and a breaking strength of 43,000 lbf, providing capacity for heavy vehicle recovery and industrial pulling. The 3 1/8 in bar length and 5 in maximum inside diameter accommodate thick recovery straps or anchor points. Users requiring certified lifting hardware or higher working load limits must select alternative equipment.
Nylon Cover and Anodized Finish
The bundled nylon cover shields the HMPE rope from abrasion and UV exposure during extended outdoor use. An anodized coating on the bar adds corrosion resistance in wet or salty environments. These integrated features reduce the need for separate protective sleeves or frequent hardware replacement. No additional software or mounting accessories are included.
Highlights
- Synthetic construction resists corrosion and UV damage
- Working load limit of 14,333 lb for heavy tasks
- Breaking strength reaches 43,000 lbf for safety margin
- Anodized coating adds extra surface protection
- Nylon cover shields HMPE rope from abrasion
Specifications
| Brand | LOCKJAW |
|---|
Questions about this item
Will the 1-1/4 in pin diameter fit the existing recovery points on my vehicle?
The shackle uses a 1-1/4 in pin diameter and a 3 1/8 in bar length; measure your recovery point hole and internal clearance to confirm the pin and bar will seat fully without binding.
How can I verify the 43,000 lbf breaking strength is intact after installation?
Inspect the HMPE rope for cuts, abrasion or UV damage, confirm the nylon cover slides freely, and ensure the anodized bar shows no deformation or corrosion before applying any load.
Does the package include the anodized bar and nylon cover shown in the specifications?
Yes, the synthetic shackle arrives assembled with the HMPE rope, nylon cover, and anodized bar; no additional hardware is required for the 14,333 lb working load limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
