Loc-Line
Loc-Line 89228 In-Line Slide Valve 2 1/2 in PK10
Pack of ten inline slide valves with 2 1/2 inch non-threaded connections for vacuum hose flow control
- Controls flow in vacuum hose systems
- Pack of ten slide valves for multiple installations
- Acetal body resists corrosion and water exposure
- Compatible with acetone, alcohol, oils and other common fluids
- 2 1/2 inch non-threaded inline connection fits standard hose
Valve Pack for Fluid Systems
This Loc-Line 89228 pack supplies ten in-line slide valves built from corrosion-resistant acetal. They suit machine-shop coolant lines, vacuum hose runs and general fluid control where chemical compatibility matters. Each valve handles a 2 1/2 in non-threaded connection without additional fittings.
Inline Flow Control Performance
The slide mechanism opens and closes without threads, so pressure drop stays low in normal coolant or vacuum service. Acetal construction resists water, oils, solvents and the listed chemicals without swelling or degradation. No external power or actuation is required for routine operation.
Ten-Unit Quantity for Multi-Port Installations
The box contains exactly 10 valves, making it practical for equipping several branches or replacing a full bank at once. Buyers needing a single valve or a different connection diameter will need another pack size. No other quantities or diameters are included.
Highlights
- Controls flow in vacuum hose systems
- Pack of ten slide valves for multiple installations
- Acetal body resists corrosion and water exposure
- Compatible with acetone, alcohol, oils and other common fluids
- 2 1/2 inch non-threaded inline connection fits standard hose
Specifications
| Brand | LOC-LINE |
|---|
Questions about this item
How do I install the 2 1/2 in non-threaded inline slide valve into my vacuum hose line?
Push each hose end fully onto the smooth acetal barbs until seated; the common mistake is leaving a gap that lets vacuum leak under load.
What maintenance will the acetal slide valves need after extended exposure to acetone, gasoline or sodium hydroxide?
Inspect the slide mechanism periodically for swelling or grit; flush with compatible solvent and replace any valve that no longer seals smoothly.
At what point does the corrosion-resistant acetal body become the limiting factor during continuous high-temperature fluid flow?
Acetal softens above its rated service temperature, so the valve body will deform before the slide mechanism fails if the fluid runs hotter than specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
