Loc-Line
Loc-Line 61509 BSPT connector 3/4 in pack of 4
BSPT connector rated to 40 psi, compatible with acetone, alcohol, detergents, gasoline, oils and solvents, pack of four
- Connects 3/4 in. hose to BSPT thread
- Handles up to 40 psi working pressure
- Resists acetone, alcohol, gasoline and solvents
- Pack of four speeds multi-point setup
- Ready for coolant, oil or lubricant lines
Loc-Line 61509 BSPT connector pack
The Loc-Line 61509 is a BSPT connector supplied in a pack of four for fluid-handling systems. It is intended for maintenance engineers and machine-shop technicians who need reliable joints in coolant or lubricant lines.
Male BSPT thread with non-threaded end
Each connector features a 3/4 inch male BSPT thread on one end and a non-threaded 3/4 inch diameter on the other, rated to a maximum of 40 psi. The material resists a wide range of shop fluids including oils, grease, solvents, acetone, alcohol, gasoline, sodium hydroxide and dish detergents.
Check thread standard and pressure rating
Verify that your existing ports use the BSPT thread standard rather than NPT or another taper, as the two are not interchangeable. Confirm the system operating pressure stays at or below 40 psi and that the carried fluid appears on the compatibility list before ordering.
Highlights
- Connects 3/4 in. hose to BSPT thread
- Handles up to 40 psi working pressure
- Resists acetone, alcohol, gasoline and solvents
- Pack of four speeds multi-point setup
- Ready for coolant, oil or lubricant lines
Specifications
| Brand | LOC-LINE |
|---|
Questions about this item
How often should I replace the BSPT connectors if they see daily coolant flow?
These connectors are rated to 40 psi maximum pressure; inspect seals at each fluid change and replace any fitting that shows cracking, thread wear or leakage.
What pressure limit will I hit first when running the line continuously?
The 40 psi ceiling is the hard limit; sustained pressure above that rating can deform the BSPT threads and cause seal failure.
Will the connectors get hot or noisy when coolant circulates all day?
The fittings are passive brass components with no moving parts, so they add no noise and negligible heat beyond the fluid temperature itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
