We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gray plastic round nozzles with 0.117 inch holes

Loc-Line

Loc-Line 49486-G Round Nozzle 0.117" PK10

SKU CH-2PWD-WY1AH

Pack of ten round nozzles with 0.117 inch hole diameter rated to 110 psi and 170 °F

  • Precise coolant flow with 0.117" hole diameter
  • Pack of 10 nozzles for multiple setup points
  • Withstands 110 psi operating pressure
  • Rated to 170 °F maximum temperature
  • Swivels up to 85° for flexible positioning

Loc-Line ProStream Nozzle 49486-G

The Loc-Line 49486-G is a round ProStream nozzle with a 0.117 inch hole diameter. It comes in a pack of ten pieces for coolant or lubricant delivery systems. The nozzle accepts a 1/4 inch non-threaded connection for quick assembly.

Replaces fixed-direction fittings

The adjustable design swings up to 85 degrees to aim flow precisely at the work area. This upgrade is worth it when rigid nozzles cannot reach tight features or when frequent repositioning slows down changeovers. It handles pressures up to 110 psi without leaking.

Coolant capacity and limits

The acetal construction tolerates fluids such as oils, alcohols, acetone and sodium hydroxide solutions. Maximum operating temperature is 170 degrees Fahrenheit before material softening becomes a concern. Chemical attack or sustained heat beyond this rating will shorten service life.

Highlights

  • Precise coolant flow with 0.117" hole diameter
  • Pack of 10 nozzles for multiple setup points
  • Withstands 110 psi operating pressure
  • Rated to 170 °F maximum temperature
  • Swivels up to 85° for flexible positioning

Specifications

BrandLOC-LINE

Questions about this item

What size opening does the 0.117 inch hole diameter on the Loc-Line 49486-G nozzle require for mounting?

The non-threaded connection diameter is 1/4 inch, so the nozzle fits directly into a 1/4 inch Loc-Line hose segment without threads or adapters.

How do I install the ProStream nozzle and what is the common mistake to avoid?

Push the nozzle firmly onto the 1/4 inch hose end until seated; the common mistake is not pushing it fully home, which can cause leaks at the maximum 110 psi pressure rating.

When will the round nozzle need replacement given the chemical resistance list and temperature limit?

Replace the nozzle if it shows cracking or swelling after exposure to incompatible fluids, or if operating temperatures exceed the 170 degrees F maximum rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.