We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten Loc-Line round nozzles with 0.086 inch holes

Loc-Line

Loc-Line 49485 Round Nozzle 0.086" PK10

SKU CH-27MH-BXERM

Pack of ten round nozzles with a 0.086-inch hole diameter for precise fluid control

  • Precise coolant targeting with 0.086 in hole diameter
  • Wide articulation up to 85 degrees swing angle
  • Handles 110 psi maximum pressure rating
  • Resists heat up to 170 degrees Fahrenheit
  • Pack of ten nozzles for multiple setups

What This Nozzle Pack Contains

This pack includes ten Loc-Line ProStream round nozzles, part number 49485, each with a 0.086 inch hole diameter. They are new valves intended for directing coolant or lubricant in machining and plumbing setups. The non-threaded connection measures one quarter inch.

The Spec That Determines Fit

The critical figure is the 0.09 inch hole diameter, which sets the flow rate and stream precision for your application. Maximum swing angle reaches 85 degrees, and the pressure rating tops out at 110 psi. Temperature resistance extends to 170 degrees Fahrenheit.

Capacity And Chemical Compatibility

The nozzles handle acetone, alcohol, dish detergents, ethyl, gasoline, grease, lacquer solvents, oils and sodium hydroxide without degradation. They are not suited for fluids or pressures beyond the listed ratings, nor for threaded connections. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Precise coolant targeting with 0.086 in hole diameter
  • Wide articulation up to 85 degrees swing angle
  • Handles 110 psi maximum pressure rating
  • Resists heat up to 170 degrees Fahrenheit
  • Pack of ten nozzles for multiple setups

Specifications

BrandLOC-LINE

Questions about this item

What does the 0.086 inch hole diameter mean for coolant flow in a CNC setup?

The 0.086 inch hole produces a focused, high-velocity stream for precise chip clearing and targeted cooling on small workpieces.

How does the 110 psi pressure rating limit the pump I can use with these nozzles?

The 110 psi maximum means the supply pump must not exceed that pressure, or the nozzle could fail or leak.

What mounting hardware do I need for the 1/4 inch non-threaded connection on these nozzles?

The 1/4 inch non-threaded connection fits Loc-Line modular hose segments directly; no threaded fittings or adapters are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.