We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten Loc-Line 49480-G round nozzles, 0.062 inch holes, plastic finish

Loc-Line

Loc-Line 49480-G Round Nozzle 0.062" Hole PK10

SKU CH-PMD6-7ZDJP

Pack of ten ProStream nozzles with 0.062" holes, rated to 110 psi and 170 °F

  • Precise 0.062" hole delivers targeted flow
  • Pack of 10 nozzles covers multiple jobs
  • Swing angle up to 85° for flexible positioning
  • Rated to 110 psi for reliable pressure handling
  • Withstands 170 °F for high-temp applications

Loc-Line 49480-G ProStream Nozzle 10 Pack

This Loc-Line ProStream nozzle pack contains ten round nozzles with a 0.062 inch hole diameter. They connect via a non-threaded quarter inch fitting and suit coolant or lubricant delivery in machining setups. Each nozzle handles pressures up to 110 psi and temperatures up to 170 degrees Fahrenheit. The swing angle reaches a maximum of 85 degrees.

Suits CNC coolant lines not for high pressure

These nozzles fit operators directing fluid precisely at the tool tip on CNC mills or lathes. They work with acetone alcohol detergents ethyl gasoline grease lacquer solvents oils and sodium hydroxide. Buyers needing threaded connections or pressures above 110 psi should look at other valve types. The fixed 0.062 inch hole does not adjust flow volume.

0.062 inch hole diameter decides fit

The 0.062 inch hole diameter is the single specification that determines whether this nozzle matches your coolant pressure and flow requirements. A smaller hole increases velocity a larger hole increases volume. Verify the required orifice size against your pump specs before ordering this ten pack.

Highlights

  • Precise 0.062" hole delivers targeted flow
  • Pack of 10 nozzles covers multiple jobs
  • Swing angle up to 85° for flexible positioning
  • Rated to 110 psi for reliable pressure handling
  • Withstands 170 °F for high-temp applications

Specifications

BrandLOC-LINE

Questions about this item

What Loc-Line hose size must I already own for the 49480-G nozzle to connect?

The nozzle fits a 1/4 in non-threaded connection, so you need Loc-Line 1/4 in modular hose segments.

Will the 0.062 in hole nozzle still swing 85 degrees when mounted on older Loc-Line hose?

Yes, the ProStream nozzle keeps its 85 degree maximum swing angle on any compatible 1/4 in Loc-Line hose.

How can I confirm the 49480-G nozzle is working correctly after installation?

Pressurise the line up to 110 psi and verify fluid exits the 0.062 in hole at the angle you set, up to 85 degrees.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.