We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty 1/4 in Loc-Line spray bar nozzles in bulk packaging

Loc-Line

Loc-Line 49442 Spray Bar 1/4 in 20 pack

SKU CH-VN2E-NRMPV

A 20-pack of 1/4-inch spray-bar nozzles rated to 110 psi and 170°F with a 54-degree swing angle

  • Directs coolant precisely with 0.1 in holes
  • Adjusts flow angle up to 54 degrees
  • Withstands 110 psi system pressure
  • Resists heat up to 170 degrees F
  • Pack of 20 spray bars for multiple setups

1/4 in Spray Bar 20 Pack

The Loc-Line 49442 is a 1/4 inch spray bar nozzle supplied in a pack of twenty. It is built for coolant, lubricant or cleaning-fluid delivery in machining, fabrication and maintenance tasks. The non-threaded connection fits standard 1/4 inch Loc-Line hose segments without additional fittings.

Replaces single-outlet nozzles

A single nozzle directs flow to one point; this bar distributes fluid through multiple 0.1 inch holes along its length. The upgrade is worth it when a workpiece or tool needs broad, even coverage rather than a concentrated stream. The 54 degree maximum swing angle lets you aim the pattern without re-plumbing the supply line.

Handles 110 psi and 170 °F

The bar is rated for pressures up to 110 psi and temperatures up to 170 degrees F, covering most shop air, coolant and solvent systems. It runs out of headroom in high-pressure hydraulic circuits or in processes that exceed the temperature limit. The listed chemical compatibilities include acetone, alcohols, oils and common solvents.

Highlights

  • Directs coolant precisely with 0.1 in holes
  • Adjusts flow angle up to 54 degrees
  • Withstands 110 psi system pressure
  • Resists heat up to 170 degrees F
  • Pack of 20 spray bars for multiple setups

Specifications

BrandLOC-LINE

Questions about this item

What diameter hole does the 1/4 in spray bar need for mounting?

Each nozzle has a 0.1 in hole diameter and a non-threaded 1/4 in connection for push-fit installation.

How do you install the spray bar and what step is often missed?

Push the 1/4 in non-threaded ends onto Loc-Line hose segments until fully seated; the common miss is leaving a gap that leaks at 110 psi.

When should the spray bar be replaced under normal use?

Replace if the swing angle drops below 54 degrees, cracks appear after 170 °F exposure, or chemical attack from incompatible fluids occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.