We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of twenty 90-degree round nozzles, 1/16 inch hole diameter

Loc-Line

Loc-Line 49439 90 Degree Round Nozzle 1/16in Pack of 20

SKU CH-XQHH-PXAG6

Pack of 20 90-degree round nozzles with 0.06-inch holes, rated to 110 psi and 170 °F, compatible with common solvents and lubricants

  • Directs flow at tight angles with 90 degree bend
  • Pack of 20 nozzles keeps spares on hand
  • Withstands 110 psi maximum working pressure
  • Operates up to 170 degrees Fahrenheit
  • Resists acetone, gasoline, oils and solvents

Loc-Line 49439 1/16in Nozzle Pack

This pack contains twenty 90-degree round nozzles designed for precise fluid delivery in plumbing and tool applications. Each nozzle features a 0.06-inch hole diameter and a non-threaded 1/4-inch connection. The components are rated for a maximum pressure of 110 psi and a temperature limit of 170 degrees Fahrenheit. They suit maintenance professionals needing bulk replacement parts.

Suits low-pressure coolant and lubricant lines

These nozzles work with acetone, alcohol, oils, grease and similar compatible lubricants listed in the data. The maximum swing angle is 54 degrees, limiting directional adjustment range. Buyers who need threaded connections or higher pressure ratings should look at alternative valve types. The pack quantity is fixed at twenty units.

1/16in hole diameter and 54-degree swing

The 0.06-inch orifice size determines the flow rate and spray pattern for the intended fluid. The 54-degree maximum swing angle defines the adjustable positioning capability during operation. Verify these two specifications match the requirements of the target plumbing or tool system before purchase.

Highlights

  • Directs flow at tight angles with 90 degree bend
  • Pack of 20 nozzles keeps spares on hand
  • Withstands 110 psi maximum working pressure
  • Operates up to 170 degrees Fahrenheit
  • Resists acetone, gasoline, oils and solvents

Specifications

BrandLOC-LINE

Questions about this item

What does the 90-degree angle mean when the nozzle is installed?

The nozzle directs flow at a right angle from the hose, and the joint can swing up to 54 degrees off that axis for fine positioning.

What does the 110 psi pressure rating cap in practice?

It sets the maximum operating pressure; the nozzle is tested to 110 psi and should not be used above that limit.

What does the 1/4-inch non-threaded connection need to fit?

It pushes onto a 1/4-inch Loc-Line hose segment; no threads or tools are required for assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.