We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White nylon push-fit tee fitting with three 3/8 inch connections

Liquifit

Liquifit 6508 60 18WP2 Tee Fitting 3/8 in Nylon White 10

SKU CH-E5RX-16744

Push-fit tee fitting joins 3/8 inch tubes for potable water or carbon dioxide, rated to 230 psi, white nylon, pack of 10

  • Push-fit tee connects three 3/8 in lines without tools
  • Nylon body handles 230 psi for water and CO₂ systems
  • White colour suits potable-water installations
  • Pre-applied thread sealant on NPTF side speeds assembly
  • Pack of 10 fittings covers multiple connection points

3/8 in Nylon Tee Fitting 10-Pack

This push-fit tee fitting joins three 3/8 in tubes in a single junction. The white nylon body resists corrosion and is rated for potable water and carbon dioxide lines. A pack of 10 fittings covers multiple branch points in a plumbing or pneumatic layout.

Sustained Pressure Performance

The fitting carries a maximum operating pressure of 230 psi, a figure that applies to continuous service rather than a momentary spike. Nylon construction maintains dimensional stability under prolonged pressurisation, reducing the risk of creep or stress relaxation at the sealed joints.

Push-Fit Interface Limits

Each branch uses a push-to-connect seal that relies on tube outer diameter tolerance and clean insertion depth. The connection is not threaded, so it cannot be adapted to NPT ports without a separate transition fitting. Side A is specified as NPTF, while sides B and C remain push-to-connect only.

Highlights

  • Push-fit tee connects three 3/8 in lines without tools
  • Nylon body handles 230 psi for water and CO₂ systems
  • White colour suits potable-water installations
  • Pre-applied thread sealant on NPTF side speeds assembly
  • Pack of 10 fittings covers multiple connection points

Specifications

BrandLIQUIFIT

Questions about this item

Does the nylon body handle the 230 psi rating without heat buildup during continuous water flow?

The fitting is rated for 230 psi maximum operating pressure and is made of nylon, which does not generate heat under normal fluid flow conditions.

What tubing and thread sealant do I need to install the 6508 tee?

Use 3/8 in outer-diameter tubing for the two push-to-connect ends and 3/8 in NPTF thread for the third port; the listing states pre-applied thread sealant is not included.

Will this white 6508 tee connect to my existing 3/8 in push-fit plumbing?

Yes — both push-to-connect ports accept 3/8 in tube outer diameter, so it joins directly to the same size push-fit tubing you already have.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.