We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small white PoE splitters with Ethernet and DC power ports

LINOVISION POE-SP01 powerline networking 10/100Mbps DC12V 2A 2 pack

SKU CH-QH9S-AMG1D MPN POE-SP01

Splits IEEE 802.3af/at PoE into 10/100 Mbps data and 12 V 2 A DC power, includes two splitters with 5.5 × 2.1 mm connectors and 4 kV surge protection

  • Interfaceethernet
  • Powerline Speeds100 megabits_per_second
  • Connection TypeEthernet
  • Connection Speeds100 megabits_per_second
  • Kit TypeIndoor, DC12V 2A Output
  • Power Supply12 volts
  • Splits PoE into 100 Mbps data and 12 V power
  • Delivers 12 V at 2 A through 5.5 × 2.1 mm plug
  • Works with both Mode A and Mode B PoE sources
  • 4 kV surge protection plus 3500 V isolation safeguards connected gear
  • Two splitters and two DC connectors included for dual-device setup

PoE Splitter for non-PoE devices

This PoE splitter separates IEEE 802.3af/at input into 10/100Mbps Ethernet data and a DC 12V 2A power output. It uses all eight cable pins to support both Mode A and Mode B power delivery from a PoE switch or injector. Two units are included for multi-device installations.

Installers powering cameras, APs or VoIP phones

Suited for technicians adding IP cameras, wireless access points, microphones or VoIP phones where no local mains outlet exists. Not for buyers who need Gigabit data rates or PoE pass-through to another powered device.

10/100Mbps data rate with 12V 2A output

The splitter delivers a maximum of 100 megabits per second on the Ethernet port while supplying up to 2 amps at 12 volts through a 5.5 by 2.1 mm plug. This bandwidth and power ceiling determines whether a specific camera or access point can operate reliably.

Highlights

  • Splits PoE into 100 Mbps data and 12 V power
  • Delivers 12 V at 2 A through 5.5 × 2.1 mm plug
  • Works with both Mode A and Mode B PoE sources
  • 4 kV surge protection plus 3500 V isolation safeguards connected gear
  • Two splitters and two DC connectors included for dual-device setup

Specifications

BrandLINOVISION
ModelPOE-SP01
Interfaceethernet
Powerline Speeds100 megabits_per_second
Connection TypeEthernet
Connection Speeds100 megabits_per_second
Kit TypeIndoor, DC12V 2A Output
Power Supply12 volts
Weight0.118 kilograms

Questions about this item

What size DC plug does the POE-SP01 splitter use for its 12 V output?

The splitter provides a 5.5 x 2.1 mm DC plug and includes an extra connector so you can power devices with different barrel-jack sizes.

Which PoE wiring modes does the POE-SP01 accept on its input port?

It accepts IEEE 802.3af/at on all eight pins, so both Mode A and Mode B power sourcing equipment work without rewiring.

What surge rating protects the POE-SP01 from lightning or electrical spikes?

The PoE port is rated for 4 kV surge protection and 3500 V isolation to guard connected gear in harsh environments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.