We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast-iron SPDT momentary foot switch with two mounting holes

LINE-MASTER

LINE-MASTER 632-S SPDT Momentary Foot Switch 125/250V AC 20A

SKU CH-KW0Y-R07GZ

A momentary foot switch with SPDT contacts rated for 20 A at 125/250 V AC in a cast-iron housing

  • TypeIndustrial Electrical Controls & Automation
  • Color MappingBlack
  • Hands-free control with SPDT momentary switching
  • Reliable 20 A rating at 125/250 V AC
  • Durable cast-iron housing rated IP20
  • Certified to CE, CSA, RoHS and UL standards
  • Secure mounting via two integrated holes

Industrial Momentary Foot Switch

The LINE-MASTER 632-S is a heavy-duty SPDT momentary switch rated for 125/250V AC at 20A. Its cast-iron housing and NEMA 1 enclosure suit industrial control panels, machine tools, and automation tasks where hands-free actuation is required.

Simple Screw Mounting

Two pre-drilled mounting holes allow direct fastening to a flat surface or pedal board without special brackets. The momentary action returns automatically when released, so wiring must accommodate a normally-open/normally-closed SPDT circuit; incorrect polarity or over-tightened terminals are the common installation errors.

20 Amp Contact Limit

The switch carries a maximum of 20A at the rated voltage, so loads exceeding this value need an external contactor or relay. IP20 ingress protection means the unit is not sealed against dust or water, restricting use to dry indoor environments. CE, CSA, RoHS, and UL listings confirm compliance with basic safety standards.

Highlights

  • Hands-free control with SPDT momentary switching
  • Reliable 20 A rating at 125/250 V AC
  • Durable cast-iron housing rated IP20
  • Certified to CE, CSA, RoHS and UL standards
  • Secure mounting via two integrated holes

Specifications

TypeIndustrial Electrical Controls & Automation
BrandLINEMASTER
Color MappingBlack

Questions about this item

How can I verify the LINE-MASTER 632-S is operating correctly after wiring it?

Press the pedal and confirm the connected load activates only while the pedal is held; release the pedal and the load should stop immediately, matching the momentary SPDT action rated for 20 A at 125/250 V AC.

What comes with the foot switch and what must I purchase separately?

The unit includes the cast-iron housing with two mounting holes; you must supply your own power cord, wire connectors and any conduit or strain-relief fittings required by your installation.

Which version of the 632-S should I choose for a 20 A circuit at 250 V AC?

The single model listed carries a 20 A, 125/250 V AC rating with SPDT momentary action, NEMA 1 and IP20 protection, and UL, CSA, CE and RoHS markings, so it covers that requirement directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.