Lincoln Electric
Lincoln Electric KH710 Contact Tip 0.025" Tweco/Binzel Pack of 10
Pack of ten copper contact tips for MIG welding with 0.025 inch wire up to 100 amps
- TypeTools
- Compatible with Lincoln LE31MP series guns
- Tapered copper tip handles 100 A MIG welding
- 025 in wire size for flux-cored and solid wire
- Threaded connection ensures secure fit in Tweco/Binzel style
- Pack of 10 tips reduces downtime on the job
Lincoln Electric KH710 Contact Tip 0.025
The Lincoln Electric KH710 is a tapered contact tip designed for MIG welding (GMAW) with flux-cored or solid wire up to 0.025 inch diameter. It fits Lincoln LE31MP series guns and Tweco/Binzel style connections. The copper construction handles standard-duty applications at a maximum current of 100 A. Each pack contains ten tips for workshop or field use.
Threaded Connection and Wire Limits
The tip uses a threaded connection that must match the gun diffuser exactly; cross-threading or using an incompatible diffuser will cause poor electrical contact and unstable arcs. Maximum wire diameter is fixed at 0.025 inch, so larger wires cannot be fed through this tip. The standard-duty rating means it is not intended for continuous high-amperage production welding beyond the 100 A limit.
0.025 Inch Wire Diameter Decides Fit
The single specification that determines whether this is the correct part is the 0.025 inch maximum wire diameter. If your welding procedure specifies a different wire size, these tips will not feed the wire reliably and a different tip number is required.
Highlights
- Compatible with Lincoln LE31MP series guns
- Tapered copper tip handles 100 A MIG welding
- 025 in wire size for flux-cored and solid wire
- Threaded connection ensures secure fit in Tweco/Binzel style
- Pack of 10 tips reduces downtime on the job
Specifications
| Brand | LINCOLN ELECTRIC |
|---|---|
| Type | Tools |
Questions about this item
Which contact tip size should I pick for 0.025 inch wire?
The KH710 tip is made for 0.025 in solid or flux-cored wire, so choose this size when your wire matches that diameter.
What does the 100 A rating mean when I am welding?
It shows the maximum current the tip can handle in standard-duty MIG welding; stay at or below 100 A to avoid overheating the copper tip.
Will the threaded KH710 fit my Tweco or Binzel gun?
Yes, the threaded connection is designed for Tweco/Binzel-style guns and Lincoln LE31MP series torches.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
