Lincoln Electric
Lincoln Electric Fleetweld 5P+ 14" 5/32" E6010 10 lb
Carbon-steel SMAW electrode, 14 in long and 5/32 in diameter, delivers 60 ksi minimum tensile strength in a 10 lb pack
- MaterialHAWA
- TypeTraffic & Parking Lot
- Deep penetration from E6010 classification for root passes
- 73 to 88 ksi tensile strength delivers strong welds
- 60 to 73 ksi yield strength resists deformation
- 5/32 inch diameter suits medium-thickness carbon steel
- 14 inch length reduces electrode changes
Fleetweld 5P+ carbon-steel electrodes
Lincoln Electric Fleetweld 5P+ electrodes are AWS E6010 classified for stick welding carbon steel to carbon steel. Each rod is 14 inches long with a 5/32 inch diameter and supplied in a 10 lb package. The product is new and carries California Proposition 65 warnings for cancer and reproductive harm.
Suited for DCEP stick welding on carbon steel
These electrodes operate on DCEP current and meet 60 ksi minimum tensile strength with 48 ksi minimum yield strength. As-welded tensile ranges from 73 to 88 ksi and yield from 60 to 73 ksi. Not for users who need AC polarity, different AWS classifications, or non-carbon-steel base materials.
AWS E6010 classification determines fit
The E6010 designation confirms suitability for deep-penetration stick welding on carbon steel using DCEP current. Verify that your procedure and base material match this classification before purchase.
Highlights
- Deep penetration from E6010 classification for root passes
- 73 to 88 ksi tensile strength delivers strong welds
- 60 to 73 ksi yield strength resists deformation
- 5/32 inch diameter suits medium-thickness carbon steel
- 14 inch length reduces electrode changes
Specifications
| Brand | LINCOLN ELECTRIC |
|---|---|
| Material | HAWA |
| Type | Traffic & Parking Lot |
Questions about this item
What comes in the 10 lb box and is any extra gear required?
The box contains Lincoln Electric Fleetweld 5P+ E6010 stick electrodes, 5/32 in diameter and 14 in long, 10 lb total. You need a SMAW power source capable of DCEP output and standard welding PPE.
When should I choose the 5/32 in diameter over other sizes?
Choose 5/32 in for medium-to-heavy carbon-steel sections where the 60 ksi minimum tensile and 73–88 ksi as-welded strength suit the joint design and your machine can run the required amperage on DCEP.
What does the 60 ksi tensile rating mean on the finished weld?
It means the deposited weld metal meets a minimum 60 ksi tensile strength; actual as-welded results range from 73 to 88 ksi tensile and 60 to 73 ksi yield, giving reliable strength on carbon-steel-to-carbon-steel joints.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
