Lincoln Electric
Lincoln Electric ED030314 SuperGlaze 5356 .047 in MIG Welding Wire
ER5356 aluminium MIG wire on a 1 lb plastic spool for welding many aluminium grades
- TypeWelding Supplies
- ER5356 alloy delivers strong aluminium welds on 5083 and 5086
- .047 in diameter feeds smoothly through MIG guns
- SuperGlaze 5356 series resists porosity in GMAW work
- 1 lb plastic spool handles easily on the bench
- Suited for grades including 5052, 5154, 5454, 5456
Lincoln Electric SuperGlaze 5356 MIG Wire
Lincoln Electric SuperGlaze 5356 is a 0.047 inch aluminium MIG welding wire supplied on a one‑pound plastic spool. It carries AWS classification ER5356 and is formulated for aluminium‑to‑aluminium welding using DCEP current.
Suitable for fabricators joining listed aluminium
This wire suits welders working with the specific aluminium grades listed in the specification such as 5052, 5083 and 5356. It is not for operators who need a different wire diameter, a different alloy classification or a spool weight other than one pound.
Critical spec is the 0.047 inch wire diameter
The 0.047 inch diameter determines feed‑roller setup, tip size and amperage range on the MIG machine. Verify that the equipment is configured for this exact diameter before purchase.
Highlights
- ER5356 alloy delivers strong aluminium welds on 5083 and 5086
- .047 in diameter feeds smoothly through MIG guns
- SuperGlaze 5356 series resists porosity in GMAW work
- 1 lb plastic spool handles easily on the bench
- Suited for grades including 5052, 5154, 5454, 5456
Specifications
| Brand | LINCOLN ELECTRIC |
|---|---|
| Type | Welding Supplies |
Questions about this item
Does the 1 lb plastic spool include a contact tip or liner, or do I need to buy them separately?
The spool contains only the ER5356 aluminium wire; contact tips, liners and drive rolls for .047 in wire must be purchased separately.
Why choose the SuperGlaze 5356 .047 in spool instead of a different diameter or alloy?
The .047 in ER5356 wire matches the listed aluminium grades such as 5052, 5083 and 5356 and is sized for standard MIG guns running DCEP current.
What does the ER5356 classification mean when I am welding 5083 or 5356 aluminium in the shop?
ER5356 provides higher tensile strength and good corrosion resistance on 5xxx and 6xxx series alloys including 5083 and 5356 when welded with DCEP polarity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
