Lincoln Electric
Lincoln Electric ED028676 L-56 .035 MIG Welding Wire
MIG welding wire for carbon steel, ER70S-6 classification, .035 inch diameter with tensile strength up to 84 ksi
- TypeWelding Supplies
- AWS ER70S-6 classification ensures consistent weld quality
- .035 in diameter suits a wide range of MIG applications
- 81 ksi tensile strength with 100 % CO2 shielding gas
- 84 ksi tensile strength with 90/10 Ar/CO2 mix
- Minimum 58 ksi yield strength meets structural requirements
Lincoln Electric L-56 .035 MIG Wire
This Lincoln Electric L-56 MIG welding wire is classified to AWS ER70S-6 for carbon steel. It is supplied on a spool with a wire diameter of .035 in. The product carries California Proposition 65 warnings for cancer and reproductive harm.
Suitable Applications and Limitations
The wire suits MIG welding on carbon steel where ER70S-6 classification is required. It is not for flux-cored or stick welding processes. Buyers needing a different wire diameter or AWS classification should look at other products.
Tensile Strength by Shielding Gas
Tensile strength varies with shielding gas: 81 ksi with 100 percent carbon dioxide, 82 ksi with 75 percent argon and 25 percent carbon dioxide, 84 ksi with 90 percent argon and 10 percent carbon dioxide, and 82 ksi with 98 percent argon and 2 percent oxygen.
Highlights
- AWS ER70S-6 classification ensures consistent weld quality
- .035 in diameter suits a wide range of MIG applications
- 81 ksi tensile strength with 100 % CO2 shielding gas
- 84 ksi tensile strength with 90/10 Ar/CO2 mix
- Minimum 58 ksi yield strength meets structural requirements
Specifications
| Brand | LINCOLN ELECTRIC |
|---|---|
| Type | Welding Supplies |
Questions about this item
What MIG welder and shielding gas do I need to run this .035 ER70S-6 wire?
Use a MIG (GMAW) machine that accepts .035 inch solid wire with 100% CO2, 75/25 Ar/CO2, 90/10 Ar/CO2 or 98/2 Ar/O2 shielding gas.
Will this .035 L-56 spool feed properly through my existing drive rolls and liner?
Yes, if your drive rolls and liner are sized for .035 inch solid carbon-steel wire; mismatched rolls or a worn liner can cause feeding issues.
How do I verify the welds meet the specified strength after I finish a joint?
Confirm the wire is AWS ER70S-6 and check that completed welds achieve at least 58 ksi yield strength and the tensile strength matching your gas mix: 81 ksi with 100% CO2, 82 ksi with 75/25 or 98/2, 84 ksi with 90/10.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
