Lincoln Electric
Lincoln Electric ED015790 L-56 .025 MIG Welding Wire 12.5 lb
Carbon-steel MIG welding wire in .025 in diameter on a 12.5 lb spool, classified ER70S-6 for GMAW processes
- Size/Dimensions12.5 lb.
- MaterialCarbon Steel
- TypeWelding Supplies
- Lincoln Electric quality ensures consistent welds
- ER70S-6 classification meets AWS standards for mild steel
- 025 in diameter suits thin-gauge applications
- Tensile strength up to 84 ksi with 90/10 Ar/CO₂ shielding
- 5 lb spool supports extended production runs
Lincoln Electric L-56 .025 MIG Wire
This Lincoln Electric MIG welding wire carries AWS classification ER70S-6 and comes on a 12.5 lb spool of carbon steel. The wire diameter is .025 in and the product is new.
Suited for MIG setups using .025 wire
Welders running .025 diameter wire with carbon dioxide or argon-based shielding gases can use this spool. It is not for machines that require a different wire diameter or for flux-cored only processes.
Tensile strength varies by shielding gas
As-welded tensile strength reaches 81 ksi with 100 percent carbon dioxide, 82 ksi with 75 percent argon/25 percent carbon dioxide, 84 ksi with 90 percent argon/10 percent carbon dioxide and 82 ksi with 98 percent argon/2 percent oxygen; minimum yield strength is 58 ksi.
Highlights
- Lincoln Electric quality ensures consistent welds
- ER70S-6 classification meets AWS standards for mild steel
- 025 in diameter suits thin-gauge applications
- Tensile strength up to 84 ksi with 90/10 Ar/CO₂ shielding
- 5 lb spool supports extended production runs
Specifications
| Brand | LINCOLN ELECTRIC |
|---|---|
| Size/Dimensions | 12.5 lb. |
| Material | Carbon Steel |
| Type | Welding Supplies |
Questions about this item
What AWS classification and wire diameter does this Lincoln Electric ED015790 spool carry?
This spool is classified AWS ER70S-6 and uses a .025 in diameter wire for MIG welding.
What spool weight and material suit the wire feeder and base metal?
The 12.5 lb carbon steel spool fits standard MIG feeders and is designed for welding carbon steel workpieces.
How do you load the wire and which drive rolls match the .025 in size?
Mount the spool, thread the .025 in wire through the liner, and use V-groove drive rolls sized for .025 in to prevent slipping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
