Lincoln
Lincoln 980 Electronic Lube Meter Trap 10 gpm 1500 psi
Electronic lube meter dispenses antifreeze, diesel, motor oils and transmission fluid at up to 10 gpm and 1500 psi
- TypeDrain Components
- Measures pints, quarts, litres or gallons for flexible dispensing
- Handles 10 gpm flow for fast fluid transfer
- Withstands 1500 psi operating pressure for heavy-duty use
- Manual nozzle operation gives direct flow control
- Compatible with antifreeze, diesel, motor and transmission fluids
Electronic lube meter for fluid dispensing
The Lincoln 980 electronic lube meter measures flow during dispensing of antifreeze, diesel, motor oils and transmission fluid. It handles a maximum flow of 10 gpm at up to 1500 psi operating pressure. A 1/2 in NPTF inlet connects to standard supply lines and the manual nozzle controls discharge.
Suited for metered top-ups and controlled fills
Technicians who need accurate volume tracking in pints, quarts, litres or gallons will benefit from the electronic readout. The single latch position and manual nozzle make it less convenient for high-volume unattended dispensing where automatic shut-off is required.
10 gpm maximum flow rate at 1500 psi
This pressure and flow envelope determines whether the meter matches the pump and hose system in use. Exceeding either limit risks damage or inaccurate measurement, so verify the supply equipment stays within these boundaries.
Highlights
- Measures pints, quarts, litres or gallons for flexible dispensing
- Handles 10 gpm flow for fast fluid transfer
- Withstands 1500 psi operating pressure for heavy-duty use
- Manual nozzle operation gives direct flow control
- Compatible with antifreeze, diesel, motor and transmission fluids
Specifications
| Type | Drain Components |
|---|---|
| Brand | Lincoln |
| Model | 980 |
Questions about this item
Does the 1500 psi rating limit how long the Lincoln 980 can run during a busy shift?
The meter is rated for a maximum operating pressure of 1500 psi, so it handles continuous high-pressure dispensing without pressure-related wear.
My shop uses 1/2 in NPTF plumbing — will the Lincoln 980 thread straight on?
Yes, the inlet is 1/2 in NPTF, matching standard 1/2 in NPTF pipe threads for a direct connection.
Will the electronic display on the 980 still read accurately if I switch between motor oil and antifreeze?
The meter measures pints, quarts, litres and gallons for antifreeze, diesel, motor oils and transmission fluids, so the display stays accurate across those fluids.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



