Lincoln
Lincoln 1224 Hose Extension 24 in L Thermoplastic
Extends grease-gun reach by 24 inches with a 7,500 psi thermoplastic hose
- TypeFluids & Lubricants
- 24 in length reaches tight lubrication points
- 7 500 psi rating handles high-pressure grease jobs
- 1/8 MNPT x 7/16 UNEF fits Power Luber directly
- Thermoplastic construction resists oil and abrasion
- New Lincoln Industrial hose extension ready for use
Lincoln 1224 Hose Extension for Power Luber
The Lincoln 1224 is a 24 inch thermoplastic hose extension built for use with a Power Luber. It connects a 1/8 MNPT thread to a 7/16 UNEF thread for fluid and lubricant delivery. The assembly handles a maximum pressure of 7,500 psi. It suits technicians who need extra reach during lubrication tasks.
Fits Power Luber systems with matching threads
The extension threads directly onto compatible Power Luber equipment using the 1/8 MNPT and 7/16 UNEF connections. No adapters are required when the tool and supply line share these fittings. The 24 inch length adds working distance without re-plumbing the existing setup. It frees the operator to service fittings that are awkward to reach with the standard hose.
Withstands 7,500 psi during continuous pumping
The thermoplastic construction holds the rated 7,500 psi under sustained pump cycles rather than only during brief pressure spikes. The hose remains stable while grease is forced through at high pressure over long jobs. It is not intended for applications exceeding the stated pressure limit or for use with incompatible thread types. Buyers needing longer reaches or different end connections must source a separate extension.
Highlights
- 24 in length reaches tight lubrication points
- 7 500 psi rating handles high-pressure grease jobs
- 1/8 MNPT x 7/16 UNEF fits Power Luber directly
- Thermoplastic construction resists oil and abrasion
- New Lincoln Industrial hose extension ready for use
Specifications
| Type | Fluids & Lubricants |
|---|---|
| Brand | LINCOLN INDUSTRIAL |
Questions about this item
What is the maximum pressure the 1224 hose extension can handle before it fails?
The hose extension is rated for a maximum working pressure of 7,500 psi.
Does the thermoplastic hose stay flexible or get stiff when grease is pumped through it continuously?
Thermoplastic construction resists stiffening under pressure and stays flexible during extended pumping sessions.
What thread fittings must the grease gun and accessory have to connect this 24 in extension?
One end has a 1/8 MNPT thread and the other a 7/16 UNEF thread for direct attachment to the Power Luber and nozzle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
