Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00988838BTC
In stock
Lilliput
Lilliput RM-0208S 8×2" 1RU Rackmount Studio Monitor
Eight 2-inch rackmount monitors with 3G-SDI equalisation, re-clocking and loop-through in a single rack unit
- TypeBROADCAST MONITOR
- Eight 2-inch screens fit in a single 1RU rack space
- SDI equalisation and re-clocking keep signal integrity over long cable runs
- 8-bit TFT LCD panels show 640×240 resolution with 250cd/m² brightness
- Built-in UMD, audio level meter and time-code display for each channel
- DC 12-24V input draws only 23W and operates from -20°C to 60°C
8×2" 1RU Rackmount Studio Monitor
The Lilliput RM-0208S fits eight 2-inch 8-bit TFT LCD panels into a single rack unit. Each screen shows a physical resolution of 640×240 and supports input up to 1920×1080. Eight 3G-SDI inputs with equalisation and re-clocking feed the array, while eight loop-out ports pass signals onward. A half-width UMD area displays 32 characters alongside audio level meters and time code.
Broadcast engineers needing dense multi-source
This unit suits live production, outside broadcast trucks and master control rooms where eight SDI sources must be watched simultaneously in 1RU. The 4:3 aspect ratio and 250 cd/m² brightness match legacy monitoring workflows. Operators who require full-height 1080p panels, HDR luminance or HDMI inputs should look at larger single-screen alternatives instead.
Standard 19-inch rack installation
The monitor mounts in a 482.5 mm wide rack using the 44 mm 1RU height. A 15 V DC adapter drawing 1500 mA powers the 23 W unit from a 12–24 V supply. The only common issue is forgetting to set the source format to one of the listed SMPTE standards so the re-clocking locks correctly.
Highlights
- Eight 2-inch screens fit in a single 1RU rack space
- SDI equalisation and re-clocking keep signal integrity over long cable runs
- 8-bit TFT LCD panels show 640×240 resolution with 250cd/m² brightness
- Built-in UMD, audio level meter and time-code display for each channel
- DC 12-24V input draws only 23W and operates from -20°C to 60°C
Specifications
| Brand | LILLIPUT |
|---|---|
| Model | RM-0208S |
| Type | BROADCAST MONITOR |
Questions about this item
What power source is required to run the 8×2" rackmount monitors?
The unit operates on DC 12-24V input and ships with a 15V DC adapter drawing up to 1500mA.
Will the 3G-SDI loop-out ports pass a clean signal to older SDI recorders?
Each of the eight inputs includes an equalised and re-clocked 3G-SDI loop-out that regenerates the signal for downstream devices.
How can I confirm the monitors are displaying a valid 1080p signal after installation?
The built-in UMD shows 32 half-width characters including audio level meters and time-code readout for each active SDI channel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
