We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Lift-all

Lift-all HH130 Hose Halter Hose to Hose 2 in 30 in

SKU CH-0RK4-R8HGT

A hose-to-hose safety halter that restrains whipping on hydraulic, pneumatic or water lines up to 2 in inside diameter with a 30 in overall length

  • Secures hoses up to 2 in inside diameter
  • Rated to 26,000 psi at 1/4 in ID for high-pressure safety
  • 30 in overall length covers standard hose runs
  • Nylon single-ply web halter resists abrasion and wear
  • Meets OSHA and Canada OHS whip-check standards

Hose-to-Hose Halter for 2 in Hoses

The Lift-all HH130 is a web safety halter that links two pressurised hoses together. It accepts hose inside diameters from 1/4 in up to 2 in and suits hydraulic, pneumatic or water lines. The 30 in overall length gives enough reach for typical whip-check positioning on site.

Rated to 26,000 psi at 1/4 in ID

Maximum working pressure is quoted at 26,000 psi for a 1/4 in inside diameter and decreases as hose bore increases. The single-ply nylon construction handles the rated range for the stated diameters but is not intended for larger bores or higher pressures than specified.

Nylon web halter with choker ends

The choker-style end loops grip each hose without metal hardware, keeping the assembly light and non-conductive. Nylon webbing resists abrasion in normal industrial use and meets Canada OHS and OSHA standards for whip-check restraint.

Highlights

  • Secures hoses up to 2 in inside diameter
  • Rated to 26,000 psi at 1/4 in ID for high-pressure safety
  • 30 in overall length covers standard hose runs
  • Nylon single-ply web halter resists abrasion and wear
  • Meets OSHA and Canada OHS whip-check standards

Specifications

BrandLIFT-ALL

Questions about this item

Will the HH130 halter fit the 2 in hydraulic hose I already run on my compressor?

Yes, it is rated for hose inside diameters from 1/4 in up to 2 in, so your existing 2 in line falls within the range.

How can I confirm the halter is holding safely once installed?

After fitting the choker ends around each hose, pull the assembly taut; the nylon web should stay snug without slipping, indicating the whip-check is engaged.

Does the package include any mounting hardware or extra cables?

The box contains only the 30 in nylon hose-to-hose halter; no bolts, clamps or additional cables are supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.