We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Lift-all

Lift-all 61013 ratchet cargo strap 27 ft 2 in 3330 lb

SKU CH-JBXJ-G4PM4

A 27-foot polyester ratchet strap with a 3,330 lb working load limit and 10,000 lb/in tensile strength meets CVSA, FMCSA and US DOT standards

  • 3330 lb working load limit secures heavy cargo
  • 10,000 lb tensile strength withstands extreme tension
  • 27 ft overall length reaches distant anchor points
  • 2 in polyester webbing resists abrasion and UV
  • 16 in fixed end speeds up attachment

Cargo strap for heavy loads

The Lift-all 61013 is a ratchet tie-down strap built for securing heavy cargo during transport. It suits commercial drivers, fleet operators and anyone moving equipment that demands a high working load limit.

Polyester webbing with steel end fittings

Yellow polyester webbing runs the full 27 ft length and measures 2 in wide for strength and visibility. A fixed end of 16 in terminates in steel hardware while the ratchet mechanism allows precise tensioning and quick release day to day.

Meets CVSA, FMCSA and US DOT standards

The strap carries a working load limit of 3,330 lb and a tensile strength of 10,000 lb per inch, aligning with CVSA, FMCSA and US DOT requirements. It is not suited for overhead lifting or applications that exceed the stated load limit.

Highlights

  • 3330 lb working load limit secures heavy cargo
  • 10,000 lb tensile strength withstands extreme tension
  • 27 ft overall length reaches distant anchor points
  • 2 in polyester webbing resists abrasion and UV
  • 16 in fixed end speeds up attachment

Specifications

BrandLIFT-ALL

Questions about this item

What working load limit does the 2-inch ratchet strap support?

The strap has a working load limit of 3,330 lb and a tensile strength of 10,000 lb/in, meeting CVSA, FMCSA and US DOT standards.

What are the overall length and fixed-end length of this tie-down?

Overall length is 27 ft with a fixed end of 16 in, using 2-inch wide polyester webbing and steel end fittings.

How is the ratchet mechanism tensioned and secured?

Thread the loose end through the ratchet mandrel, pull slack tight, then pump the handle until the load is firm; always lock the handle fully closed after tensioning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.