We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal enclosure with hardwired terminals and front switch

Liebert

Liebert MP2-130HW MicroPOD 24A Maintenance Bypass Switch accessory

SKU CH-MGMD-8W66X MPN MP2-130HW

Maintenance bypass switch allows 24 A UPS servicing without power interruption at 110 V AC input, 120 V AC output, 50 Hz with 6 ms switching

  • SpecificationsInput Voltage: 110 V AC Output Voltage: 120 V AC Current: 24
  • Maintenance bypass keeps power flowing during UPS service
  • 24 A rating supports high-current single-phase loads
  • 6 ms open-transition switching limits transfer interruption
  • Surge protection shields connected equipment from transients
  • Hardwired connections suit permanent rack or wall installations

Purpose and Audience

The Liebert MP2-130HW MicroPOD is a 24 A maintenance bypass switch designed for hardwired UPS installations. It allows technicians to service or replace the UPS without interrupting power to connected critical loads. This accessory suits facility managers and IT teams responsible for continuous uptime in server rooms or network closets. It is not for buyers who need plug-and-play receptacles or portable power distribution.

Critical Specification

The unit operates with an input voltage of 110 V AC and delivers an output voltage of 120 V AC at a frequency of 50 Hz. It supports a total current draw per phase of 24 A and features a switching time of 6 ms using an open transition switch type. Surge protection is integrated and all connections are hardwired.

Bundled Impact

The product is supplied as a standalone switch module without additional cables, software or mounting hardware. Installers must provide suitable conduit, wiring and overcurrent protection to match the 24 A rating. No configuration utility or monitoring software is included, so integration relies entirely on the existing UPS management infrastructure.

Highlights

  • Maintenance bypass keeps power flowing during UPS service
  • 24 A rating supports high-current single-phase loads
  • 6 ms open-transition switching limits transfer interruption
  • Surge protection shields connected equipment from transients
  • Hardwired connections suit permanent rack or wall installations

Specifications

BrandLiebert
ModelMP2-130HW
SpecificationsInput Voltage: 110 V AC
Output Voltage: 120 V AC
Current: 24 A Total Current Draw Per Phase
Frequency: 50 Hz
Input Voltage Range: 120 V AC
Protection Type: Surge
Switching Time: 6 ms
Receptacles: Hardwired
Plug/Connector Type: Hardwired
Switch Type: Open Transition
Shipping weight6.80 kg
Package size508 × 127 × 127 mm

Questions about this item

What does the 24 A current rating mean when the MicroPOD is installed in my UPS circuit?

It allows the bypass switch to carry up to 24 amperes per phase continuously, so connected loads drawing up to that level stay powered during UPS maintenance.

How does the hardwired interface and open-transition switching affect my installation?

The unit has no plug or receptacle; conductors are landed directly on terminals, and the 6 ms open-transition break transfers load between UPS and bypass without overlap.

What physical provision is needed to mount and wire this 130 model bypass switch?

It is designed for hardwired connection, so you need a suitable enclosure or panel space with cable entries for the incoming and outgoing AC conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.