We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black card reader with SD microSD and CF slots and USB 3.1 cable

Lexar

Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader (LRW500URBNA)

SKU CH-CVSN-7N744

Reads SD, microSD and CompactFlash cards via USB 3.1 at up to 312 MB/s for SD and microSD and 160 MB/s for CompactFlash

  • Read SD, microSD and CompactFlash cards with one device
  • Transfer SD and microSD files at up to 312 MB/s
  • Move CompactFlash data at up to 160 MB/s
  • Works with USB 3.1 and 2.0 ports for broad compatibility
  • Backwards compatible with UHS-I cards up to 170 MB/s

Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader

This reader transfers files from SD, microSD and CompactFlash cards over a USB 3.1 connection. It reaches up to 312MB/s for SD and microSD media and up to 160MB/s for CompactFlash cards. Photographers and videographers who work with multiple card formats can consolidate their transfer workflow into a single device. The unit is backwards compatible with UHS-I cards at speeds up to 170MB/s.

Upgrading from single-slot or USB 2.0 readers

Replacing a single-format reader eliminates the need to swap adapters when moving between SD, microSD and CompactFlash media. The jump to USB 3.1 is worth it when your cards support UHS-II speeds and your computer has a USB 3.1 port, because the 312MB/s ceiling matches high-end card performance. If you only use UHS-I cards, the 170MB/s backward-compatible limit still exceeds typical USB 2.0 throughput. The reader does not add a second card slot for simultaneous offload.

Fitting into a workstation

The device plugs into any USB 3.1 or USB 2.0 port on a desktop or laptop, requiring no external power. It frees up a camera’s USB port and avoids the slower in-camera transfer path. A USB 3.1 host controller is needed to reach the 312MB/s SD and microSD ceiling; on USB 2.0 hosts the transfer rate will be constrained by the bus. CompactFlash UDMA 7 cards are supported at up to 160MB/s when the host allows.

Highlights

  • Read SD, microSD and CompactFlash cards with one device
  • Transfer SD and microSD files at up to 312 MB/s
  • Move CompactFlash data at up to 160 MB/s
  • Works with USB 3.1 and 2.0 ports for broad compatibility
  • Backwards compatible with UHS-I cards up to 170 MB/s

Specifications

No published specifications for this item yet.

Questions about this item

Does the Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader need a separate power adapter or driver installation?

It draws power directly from the USB 3.1 or USB 2.0 port and requires no external adapter or driver installation on modern operating systems.

What is the correct way to insert a CompactFlash card so the pins are not bent?

Align the card label-side up with the connector holes facing the slot, then press firmly until it clicks; forcing it sideways bends the internal pin array.

Is the USB cable on the Lexar LRW500URBNA detachable for replacement if it frays?

The cable is permanently attached; if it becomes damaged the whole reader must be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.