We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular fixture-mount sensor with IP65 rating

Leviton

Leviton Highbay Dimming PIR Occupancy Sensor HBE11-IUB 120/277/347VAC IP65 White

SKU CH-MCHZ-XHAQ9

IP65-rated PIR occupancy sensor controls 0-10V dimmable fixtures at 120/277/347VAC with interchangeable 360° or aisle lenses and adjustable timeouts up to 15 minutes

  • IP65 rated for wash-down indoor and outdoor use
  • Controls 0-10V dimmable ballasts for daylight harvesting
  • Interchangeable 360° or aisle detection lenses sold separately
  • Adjustable 1 to 15 minute full OFF timer delay
  • 8-second test mode with 1, 5, 10, 15 minute timeouts

Fixture-mount PIR occupancy sensor

The Leviton HBE11-IUB mounts directly to an industrial fixture or junction box and controls 0-10V dimmable ballasts for daylight harvesting. It operates on 120, 277 or 347 VAC supplies and carries an IP65 rating for wet indoor and outdoor locations. Interchangeable lenses provide 360-degree or aisle detection patterns and are sold separately.

IP65 wash-down rating and adjustable timing

The sealed enclosure withstands low-temperature wash-down use in food-processing or exterior areas. An 8-second test mode with 1, 5, 10 and 15 minute time-outs simplifies commissioning, while the full OFF timer delay is adjustable between 1 and 15 minutes. Dimming presets for the unoccupied state step down to 70, 60, 50 or 20 percent output.

Downward and upward daylight sensing

A selectable downward or upward facing daylight sensor lets the unit harvest ambient light from either direction via dipswitch. The sensor requires a compatible 0-10V dimmable driver and a separately purchased lens to complete the detection zone. UL and cUL listings confirm compliance for North American installations.

Highlights

  • IP65 rated for wash-down indoor and outdoor use
  • Controls 0-10V dimmable ballasts for daylight harvesting
  • Interchangeable 360° or aisle detection lenses sold separately
  • Adjustable 1 to 15 minute full OFF timer delay
  • 8-second test mode with 1, 5, 10, 15 minute timeouts

Specifications

BrandLeviton

Questions about this item

How do I install the HBE11-IUB sensor and what is the step people often get wrong?

Mount the sensor directly to an industrial fixture or electrical junction box; the step people miss is that the lens is sold separately and must be chosen and fitted before the sensor will detect motion.

What maintenance or replacement will the HBE11-IUB need later?

The interchangeable high/low area detection lenses may need replacement if damaged or if the coverage pattern must change; the sensor housing itself is IP65 rated for wash-down environments and has no user-serviceable parts.

What limit shows up first under sustained use of the HBE11-IUB?

The 0-10V dimming output is capped at the preset unoccupied levels of 70%, 60%, 50% or 20% and the full-OFF timer delay maxes out at 15 minutes, so the dimming floor and timeout ceiling are the first constraints you will hit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.