LetLinkSo
LetLinkSo LLS-CB-1MC1MC-02 PCIe 5.0 MCIO x4 to MCIO x4 cable 1.6ft (50cm)
PCIe 5.0 MCIO x4 male-to-male cable delivers 128 Gbps over four lanes at 32 GT/s with 38-pin SFF-TA-1016 connectors in a 1.6 ft (50 cm) copper assembly
- TypePCIe 5.0
- ColorBlack
- Length1.6 feet(50cm)
- Connector Number2
- Connector Detail1 x MCIO x4 to 1 x MCIO x4
- Terminal GenderMale to Male
- Delivers PCIe 5.0 bandwidth up to 128 Gbps across four lanes
- Slim MCIO x4 connectors with 0.6 mm pitch suit high-density server racks
- Male-to-male 38-pin design preserves signal integrity at 32 GT/s per lane
- Copper conductors support SAS 4.0 and PCIe 5.0 for multi-protocol compatibility
- 6 ft (50 cm) length enables tidy routing in compact chassis
PCIe 5.0 MCIO x4 cable for data centres
This LetLinkSo cable connects two MCIO x4 male ports in a straight-through layout. It carries four lanes at 32 GT/s per lane, reaching a theoretical 128 Gbps. The 1.6 ft (50 cm) length suits dense server racks and storage arrays. It is built for SAS 4.0 and PCIe 5.0 equipment.
Signal integrity over copper conductor
The 38-pin SFF-TA-1016 interface uses a 0.6 mm pin pitch to reduce crosstalk and preserve fidelity across the link. Copper conductors handle the 128 Gbps aggregate rate without active components. The black jacket is rated for standard server airflow and operating temperatures.
Four-lane MCIO x4 male-to-male link
This part only works where both endpoints present an MCIO x4 male receptacle and require a PCIe 5.0 or SAS 4.0 x4 connection. It cannot bridge to U.2, U.3, OCuLink, SlimSAS or single-lane ports. Buyers needing longer runs, right-angle exits or different pinouts must source another cable.
Highlights
- Delivers PCIe 5.0 bandwidth up to 128 Gbps across four lanes
- Slim MCIO x4 connectors with 0.6 mm pitch suit high-density server racks
- Male-to-male 38-pin design preserves signal integrity at 32 GT/s per lane
- Copper conductors support SAS 4.0 and PCIe 5.0 for multi-protocol compatibility
- 6 ft (50 cm) length enables tidy routing in compact chassis
Specifications
| Brand | LetLinkSo |
|---|---|
| Model | LLS-CB-1MC1MC-02 |
| Type | PCIe 5.0 |
| Color | Black |
| Length | 1.6 feet(50cm) |
| Connector Number | 2 |
| Connector Detail | 1 x MCIO x4 to 1 x MCIO x4 |
| Terminal Gender | Male to Male |
| Speed | 32 GT/s (per lane) |
| Specifications | 1.6feet (50cm) |
| Conductor | Copper Conductor |
| Features | ULTRA-FAST SPEEDS: |
Questions about this item
How do I connect the straight male SFF-TA-1016 38-pin MCIO x4 connectors, and what step is often missed?
Align the keyed 38-pin MCIO x4 male plugs with the matching female ports on the backplane and controller, then press straight in until the latch clicks; the step often missed is verifying both latches are fully engaged so the 32 GT/s lanes stay seated.
What maintenance or replacement will this copper-conductor MCIO cable need over time?
The copper conductors and UL-listed jacket are rated for continuous operation; inspect the latch tabs and connector housing during scheduled server maintenance and replace the cable only if a latch is broken or the jacket shows cuts.
At what point does signal integrity become the limiting factor during sustained PCIe 5.0 traffic?
The 50 cm length is designed to meet PCIe 5.0 channel-loss budgets at 32 GT/s; the first limit under sustained load is the connector-to-connector insertion-loss margin, not the copper conductors themselves.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114981BTC
In stock
