Lenovo 00MJ163 1.5M SAS Cable Mini-SAS HD to Mini-SAS

Connection type and intended use

This Lenovo 00MJ163 cable links a Mini-SAS HD port to a standard Mini-SAS port using the SAS interface. It suits technicians and system builders who need to connect storage controllers or backplanes with mismatched connector generations. The 1.5 m length provides flexibility for routing inside rackmount or tower chassis. Buyers who require a different connector pairing or a longer reach should look elsewhere.

Behaviour under sustained load

The passive copper assembly carries SAS signalling without active components, so throughput remains consistent during continuous data transfers. Signal integrity depends on the host controller and drive firmware rather than the cable itself. No latency spikes or bandwidth drops are introduced by the cable under normal operating temperatures. Installations that demand active signal boosting for runs beyond this length will need a different solution.

Thermals noise and power draw

As a passive cable it generates no heat and draws no power from the system. Operation is completely silent because there are no fans, pumps or electronic circuits. The only thermal consideration is the ambient temperature inside the enclosure, which the cable does not affect. Environments that require plenum-rated jackets or extreme temperature specifications are not addressed by this product.