We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black transmitter and receiver kit for HDMI extension over CAT6

Lenkeng Technology Co,. Ltd

Lenkeng Technology Co,. Ltd 197Ft 60M POC HDMI Extender 1080P@60Hz Transmitter Receiver Kit CAT6 Black

SKU CH-QM2P-41R1F

Transmits uncompressed 1080p@60Hz HDMI video and audio up to 60 metres over a single CAT6 cable with POC power and built-in EDID

  • Distance60 m / 197 ft.
  • Resolution Support1080P
  • ColorBlack

Option TX+RX kit

  • Uncompressed 1080p video and audio over 60 m via a single CAT6 cable
  • 1920×1080@60 Hz resolution with 3D signal support for sharp, fluid playback
  • Built-in EDID automatically matches a wide range of display devices
  • POC unilateral power supply — only one 5 V adapter needed at the transmitter
  • HDMI 1.4 and HDCP 1.2 compliant for protected content compatibility

HDMI Extender Kit for 60-Metre Runs

The kit contains a transmitter and a receiver that carry an uncompressed 1080p@60 Hz signal over a single CAT6 cable up to 60 metres. It is built for installers who need to bridge long distances between a source such as a media player or console and a display or projector without adding latency. The units are compact, black and designed for permanent mounting in AV racks or behind screens.

POC Power and EDID Handling

Power-over-cable lets a single 5 V supply at the transmitter feed both units through the CAT6 link, cutting the need for a second outlet at the display end. The built-in EDID engine automatically negotiates timing with a wide range of sinks, so the source sees a valid display even when the far-end device is powered off or swapped. These two features reduce on-site wiring time and eliminate many handshake failures.

HDMI 1.4 and HDCP 1.2 Limits

The extender complies with HDMI 1.4 and HDCP 1.2, so it cannot pass 4K, HDR or higher-bandwidth audio formats that require later specifications. Content protected by newer HDCP versions will not transmit, and 3D frame-packing is the only stereoscopic mode supported. Buyers needing 4K60, wide-gamut colour or HDCP 2.2 compliance should look for a different extender class.

Highlights

  • Uncompressed 1080p video and audio over 60 m via a single CAT6 cable
  • 1920×1080@60 Hz resolution with 3D signal support for sharp, fluid playback
  • Built-in EDID automatically matches a wide range of display devices
  • POC unilateral power supply — only one 5 V adapter needed at the transmitter
  • HDMI 1.4 and HDCP 1.2 compliant for protected content compatibility

Specifications

Distance60 m / 197 ft.
Resolution Support1080P
ColorBlack

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the CAT6 cable or RJ45 connectors need periodic replacement to maintain the 60 m link?

The kit is designed for a solid 60 m run over a single CAT6 cable terminated to the IEEE 568b standard; the cable and connectors are passive components with no defined service interval.

What limits the 1920 x 1080@60 Hz signal first during continuous use?

The HDMI 1.4 and HDCP 1.2 compliance caps the stream at 1080p60, so the bandwidth ceiling of that standard is the first hard limit you will reach.

How much power does the transmitter draw when the pair runs all day via POC?

Only one 5 V supply is required at the transmitter; the receiver is powered over the same CAT6 link, so total draw stays at the single 5 V input.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.