Lemincrash
Lemincrash DPS-280AB-4A 280W server power supply
A 280 W server power supply with a 6+4 pin connector, 100-240 V input and 50/60 Hz operation
- Typedps
- Single/RedundantSingle
- Maximum Power280W
- Main Connector6+4pin
- Input Voltage100 - 240 V
- Input Frequency Range50/60 Hz
- 280 W maximum power for demanding server workloads
- 100–240 V input voltage supports worldwide mains supplies
- 80 Plus series certification ensures high energy efficiency
- 6+4 pin main connector fits compatible CWT POE 1U chassis
- 700 g lightweight design eases installation in 1U racks
Direct replacement server PSU
The Lemincrash DPS-280AB-4A is a 280W single unit built for 1U server chassis that use a 6+4pin main connector. It accepts 100-240V input at 50/60Hz and carries 80 Plus series certification. The package contains only the power supply itself.
Upgrade from lower-watt 1U units
This supply replaces earlier 1U modules such as the CWT POE 7708N 7908N 7716N or KSA-300S2 when the system demands the full 280W rating. The jump is worth it when the original unit cannot sustain peak draw or when the 6+4pin interface is required for the backplane.
Steady output under continuous load
Rated for 20-90% humidity and weighing 700g, the unit is designed for sustained operation in rack environments rather than short bursts. The 80 Plus series rating indicates consistent efficiency across the load range while the single non-redundant design keeps cabling simple for compatible 1U slots.
Highlights
- 280 W maximum power for demanding server workloads
- 100–240 V input voltage supports worldwide mains supplies
- 80 Plus series certification ensures high energy efficiency
- 6+4 pin main connector fits compatible CWT POE 1U chassis
- 700 g lightweight design eases installation in 1U racks
Specifications
| Brand | Lemincrash |
|---|---|
| Series | 80 Plus |
| Model | DPS-280AB-4A |
| Type | dps |
| Single/Redundant | Single |
| Maximum Power | 280W |
| Main Connector | 6+4pin |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Features | New |
| Weight | 700g |
| Humidity | 20%-90% |
| Package Contents | PSU*1 |
Questions about this item
What physical space does the 280 W server PSU need to fit in a 1U chassis?
The unit is built for a standard 1U server slot and weighs 700 g; verify the exact length and height against your chassis rail spacing before mounting.
How is the 6+4-pin main connector installed, and what step is often missed?
Align the 6+4-pin plug with the motherboard socket, push until the latch clicks, then secure the unit with the chassis retention screws so vibration cannot unseat the connector.
Which components of the DPS-280AB-4A will need replacement over time?
The internal cooling fan and electrolytic capacitors are the wear items; expect to service the fan when noise rises and replace capacitors after several years of continuous 100–240 V operation.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



