We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small nickel-plated polymer elbow flow control with screw adjustment, 8 mm tube and R1/8 BSPT thread

Legris

Legris 7665 08 10 miniature flow control 8 mm R1/8 BSPT meter out

SKU CH-8KD3-Y0127

Miniature flow control regulates air flow with a screw adjustment, fits 8 mm tube and R 1/8 BSPT thread, meters out, handles up to 145 psi and 23.3 cfm

  • TypeOther
  • Precise flow regulation via screw adjustment on 8 mm tube
  • Compact elbow design with R 1/8 in BSPT connection for tight installs
  • Technical polymer body rated to 145 psi maximum operating pressure
  • Nickel-plated finish withstands temperatures up to 70 Degrees C
  • Meter-out metering direction delivers 23.3 cfm maximum flow rate

Miniature flow control for 8 mm tubing

This Legris 7665 08 10 valve regulates compressed air in pneumatic circuits where space is limited. It fits an 8 mm tube connection and an R 1/8 BSPT thread, making it suitable for automation panels and machine builders who need precise metering in a compact elbow body.

Sustained regulation across the pressure range

The valve operates continuously between 14.5 psi and 145 psi with a maximum flow of 23.3 cfm. Its screw adjustment holds the metered-out setting steady during extended cycles, so actuators receive consistent speed without drift when supply pressure fluctuates.

Polymer body rated to 70 °C

The technical polymer body withstands normal shop temperatures up to 70 °C while the nickel-plated surfaces resist corrosion from moisture in the air line. No minimum flow threshold means the valve stays responsive even at very low demand.

Highlights

  • Precise flow regulation via screw adjustment on 8 mm tube
  • Compact elbow design with R 1/8 in BSPT connection for tight installs
  • Technical polymer body rated to 145 psi maximum operating pressure
  • Nickel-plated finish withstands temperatures up to 70 Degrees C
  • Meter-out metering direction delivers 23.3 cfm maximum flow rate

Specifications

BrandLEGRIS
TypeOther

Questions about this item

How much operating noise or heat does the Legris 7665 08 10 generate when running continuously at 145 psi?

The miniature flow control is a passive pneumatic component with no moving motor or electronics, so it produces no measurable noise or heat during continuous operation at its 145 psi maximum pressure rating.

What existing fittings and tubing must I already have to install the 8 mm tube connection and R 1/8 in BSPT thread?

You need an 8 mm pneumatic tube for the push-in connection and a female R 1/8 in BSPT port on your manifold or actuator to accept the male thread on this elbow fitting.

Will the nickel-plated technical polymer body withstand the 70 °C maximum temperature of my older compressed-air system?

Yes, the valve body is rated for a maximum operating temperature of 70 °C, so it is compatible with older systems that run at or below that temperature limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.