We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Legris 7660 flow control regulator 8mm push-to-connect inlet 1/4 BSPP outlet brass body

Legris

Legris 7660 08 13 Flow Control Regulator 8mm OD trap

SKU CH-9AAN-7P13B MPN 7660

Flow control regulator with 8 mm push-to-connect inlet, 1/4 in BSPP outlet, 14.5–145 psi range, 145 psi max pressure, 158 °F max temperature and 360° rotation

  • TypeDrain Components
  • MaterialHAWA
  • Precise flow control with 14.5 to 145 psi range
  • 8mm push-to-connect inlet for quick tubing installation
  • 1/4 inch BSPP outlet fits standard pneumatic fittings
  • Withstands 145 psi maximum pressure at 158°F
  • Full 360-degree rotation allows flexible positioning

Flow Control Regulator 8 mm OD

The Legris 7660 08 13 is a pneumatic flow control valve designed to regulate airflow speed in compressed air systems. It features an 8 mm push-to-connect inlet port and a 1/4 inch BSPP outlet port. The valve body allows 360 degrees rotation for flexible installation in tight spaces. It suits engineers and technicians building or maintaining pneumatic circuits.

Suits pneumatic speed control needs

This regulator suits applications requiring precise actuator speed adjustment within a 14.5 to 145 psi pressure range. It is not for hydraulic oil or water circuits because the specifications cover pneumatic use only. Buyers needing electric solenoid actuation or digital flow monitoring should look at electronic alternatives. The component operates up to 158 degrees Fahrenheit maximum temperature.

Key spec: 145 psi maximum pressure

The single specification that decides fit is the 145 psi maximum pressure rating. If your system pressure exceeds this limit, the valve is not the right part and a higher-rated component is required. The 8 mm push-to-connect inlet and 1/4 inch BSPP outlet must also match your existing tubing and thread standards. Verify both pressure and connection compatibility before purchase.

Highlights

  • Precise flow control with 14.5 to 145 psi range
  • 8mm push-to-connect inlet for quick tubing installation
  • 1/4 inch BSPP outlet fits standard pneumatic fittings
  • Withstands 145 psi maximum pressure at 158°F
  • Full 360-degree rotation allows flexible positioning

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model7660 08 13

Questions about this item

Will the 8 mm push-to-connect fitting need periodic replacement?

The 8 mm push-to-connect inlet is built into the valve body and is not a separate wear item; routine inspection for leaks or damage is the only expected upkeep.

What pressure limit is reached first during continuous pneumatic operation?

The valve is rated for a maximum of 145 psi, so sustained system pressure must stay at or below that figure.

How much heat does the regulator generate when running all day at 145 psi?

The body is rated to 158 °F ambient; the valve itself adds negligible heat, so enclosure temperature stays the dominant factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.