We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass flow control regulator with 6mm push-to-connect inlet and BSPP outlet

Legris

Legris 7660 06 10 Flow Control Regulator 6mm trap

SKU CH-5Q31-Z8S6S MPN 7660

A 6 mm push-to-connect flow control regulator with 1/8 in BSPP outlet, adjustable from 14.5 to 145 psi and rated to 158 °F

  • TypeDrain Components
  • MaterialHAWA
  • Precise flow adjustment with 360-degree rotation
  • Secure 6mm push-to-connect inlet for quick assembly
  • Reliable operation up to 145 psi maximum pressure
  • Performs in temperatures up to 158 Degrees F
  • 1/8 in BSPP outlet ensures standard thread compatibility

6 mm Flow Control Regulator

The Legris 7660 06 10 is a pneumatic flow control valve built for 6 mm push-to-connect tubing on the inlet and a 1/8 in BSPP outlet. It suits installers and maintenance teams who need precise, one-direction metering on compressed-air lines up to 145 psi.

Pressure range and temperature headroom

The valve operates reliably between 14.5 and 145 psi and withstands media temperatures up to 158 °F. Below the lower pressure threshold regulation becomes inconsistent, and sustained exposure above the maximum temperature rating risks seal degradation.

Interface and rotation limits

A 360-degree rotation allows full adjustment without hose twist, while the mixed 6 mm push-fit and BSPP thread ports dictate the fittings you can use. The single controlled direction means reverse flow is unrestricted, so the valve cannot meter exhaust or bidirectional circuits.

Highlights

  • Precise flow adjustment with 360-degree rotation
  • Secure 6mm push-to-connect inlet for quick assembly
  • Reliable operation up to 145 psi maximum pressure
  • Performs in temperatures up to 158 Degrees F
  • 1/8 in BSPP outlet ensures standard thread compatibility

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model7660 06 10

Questions about this item

Will the 6 mm push-to-connect inlet fit the tubing I already use?

The valve accepts 6 mm OD tubing with a push-to-connect seal; match your tube outside diameter to 6 mm for a direct fit.

How can I confirm the regulator is operating correctly once installed?

Set the desired flow, then verify the gauge reads between 14.5 and 145 psi and the body stays below 158 °F during operation.

Does the package include the 1/8 in BSPP fitting for the outlet port?

The outlet port is a 1/8 in BSPP thread; a mating fitting is not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.