We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass flow-control regulator with 3/8 push-to-connect inlet and 1/4 NPT outlet

Legris

Legris 7065 Flow Control Regulator 3/8" 1/4" NPT

SKU CH-6WE7-BZMVW MPN 7065

Flow control valve with 3/8 inch push-to-connect inlet and 1/4 inch NPT outlet, rated to 145 psi and 158 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • Precise flow adjustment with 360-degree rotation control
  • Reliable pneumatic operation up to 145 psi maximum pressure
  • Wide working range from 14.5 to 145 psi for flexibility
  • Heat-resistant performance to 158 degrees Fahrenheit
  • Versatile 3/8 inch push-to-connect inlet and 1/4 inch NPT outlet

Pneumatic Flow Control Valve

This valve manages airflow direction in compressed air systems using a push-to-connect inlet and NPT outlet. It operates within a pressure range of 14.5 to 145 psi and withstands temperatures up to 158 degrees F. The body allows 360 degrees rotation for flexible installation orientation.

Installers needing inline speed regulation

Suits technicians setting cylinder speed on pneumatic circuits where one port is 3/8 inch push-to-connect and the other is 1/4 inch NPT. Not for systems exceeding the 145 psi maximum rating or requiring electronic proportional control. Buyers needing a different port combination or thread standard should look at other models.

145 psi maximum pressure rating

This single limit decides if the regulator fits the circuit design. The pressure range of 14.5 to 145 psi covers typical shop air lines but excludes high-pressure applications. Verify the system working pressure against this ceiling before ordering.

Highlights

  • Precise flow adjustment with 360-degree rotation control
  • Reliable pneumatic operation up to 145 psi maximum pressure
  • Wide working range from 14.5 to 145 psi for flexibility
  • Heat-resistant performance to 158 degrees Fahrenheit
  • Versatile 3/8 inch push-to-connect inlet and 1/4 inch NPT outlet

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model7065 60 14

Questions about this item

Will the 1/4 in NPT outlet thread match the fittings on my existing compressed-air line?

The outlet is a 1/4 in NPT male thread, a standard taper pipe size that mates with common 1/4 in NPT female couplers and adapters used on older pneumatic systems.

How can I confirm the valve is regulating flow correctly once installed?

Turn the adjustment through its 360-degree rotation range; flow should change smoothly and hold steady between 14.5 and 145 psi without leakage at the push-to-connect inlet.

Does the package include the 3/8 in push-to-connect tubing or must I buy it separately?

Only the regulator body is supplied; 3/8 in OD push-to-connect tubing and any NPT thread sealant for the 1/4 in outlet must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.