We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White compact flow control valve with nickel-plated elbow body and 12mm tube connection

Legris

Legris 7065 12 21 Compact Flow Control Trap 12mm Tube 1/2 In

SKU CH-F820-56N90 MPN 7065

Compact flow-control elbow with screw adjustment for 12 mm tube and R 1/2 in BSPT, rated 14.5–145 psi and 0–60 cfm

  • TypeDrain Components
  • ColorWhite
  • Compact flow control for precise metering out
  • 12 mm tube and R 1/2 in BSPT connections
  • Technical polymer body with nickel-plated finish
  • Operates from 14.5 to 145 psi up to 60 cfm
  • Temperature range 0 to 70 degrees C

Compact 12 mm Flow Control for Pneumatic Lines

The Legris 7065 12 21 is a nickel-plated polymer elbow valve with a 12 mm tube connection and a 1/2 inch BSPT port. It meters air out through a screw adjustment, giving installers a compact way to regulate flow in tight machine compartments or control panels.

Sustained Operation Within 14.5–145 psi Range

The valve maintains its metering accuracy across a pressure band of 14.5 to 145 psi and temperatures from 0 to 70 °C. Flow can be dialled from zero up to 60 cfm without the setting drifting during continuous cycling, making it suitable for production equipment that runs full shifts.

Verify Thread, Tube and Chemical Compliance Before

Confirm the 1/2 inch BSPT thread matches the port on your manifold and that 12 mm OD tubing is used on the inlet side. The product carries a California Proposition 65 notice for cancer and reproductive-harm chemicals, so check local regulations if the installation is destined for that market.

Highlights

  • Compact flow control for precise metering out
  • 12 mm tube and R 1/2 in BSPT connections
  • Technical polymer body with nickel-plated finish
  • Operates from 14.5 to 145 psi up to 60 cfm
  • Temperature range 0 to 70 degrees C

Specifications

TypeDrain Components
ColorWhite
BrandLegris
Model7065 12 21

Questions about this item

How much air does the 7065 12 21 pass at its 145 psi maximum pressure?

The compact flow control is rated for a maximum flow of 60 cfm when supplied at up to 145 psi.

What thread and tube sizes must my existing fittings match for the 7065 12 21?

It requires a 12 mm push-in tube connection on one side and a R 1/2 in BSPT male thread on the other.

Will the technical polymer body of the 7065 12 21 withstand the 70 °C ceiling in my current compressed-air loop?

Yes, the valve body is rated for continuous operation up to 70 °C, so it matches that temperature limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.