We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact nickel-plated polymer flow control elbow with R3/8 BSPT thread and screw adjustment

Legris

Legris 7065 10 17 Compact Flow Control R3/8 BSPT Meter Out trap

SKU CH-WH73-11H23 MPN 7065

Compact flow-control valve with screw adjustment, R3/8 BSPT connection and meter-out metering for 10 mm tubing

  • TypeDrain Components
  • Compact flow control with screw adjustment for precise metering
  • R 3/8 BSPT connection fits standard pneumatic tubing
  • Technical polymer body withstands up to 145 psi operating pressure
  • Meter-out design regulates exhaust flow from 0 to 63.6 cfm
  • Nickel-plated finish resists corrosion across 0 to 70 °C range

Compact flow control for pneumatic systems

This Legris 7065 10 17 valve regulates airflow in pneumatic circuits with a 10 mm tube connection and R 3/8 inch BSPT thread. The nickel-plated technical polymer body handles pressures from 15 to 145 psi and temperatures from 0 to 70 degrees C. It suits automation, packaging and general industrial machinery where precise metering is required.

Check thread type and tube size before ordering

Verify that your port accepts a R 3/8 inch BSPT male thread and that the mating tube has a 10 mm outside diameter. Confirm the system pressure stays within the 15 to 145 psi range and the media temperature remains between 0 and 70 degrees C. The meter-out direction controls exhaust flow only, so ensure this matches your circuit design.

Sustained flow up to 63.6 cfm within rated limits

During continuous operation the valve maintains its set flow rate up to 63.6 cfm without drift, provided supply pressure and temperature remain inside the specified windows. The screw adjustment holds position under vibration, and the nickel-plated polymer body resists corrosion from compressed-air condensate over long duty cycles.

Highlights

  • Compact flow control with screw adjustment for precise metering
  • R 3/8 BSPT connection fits standard pneumatic tubing
  • Technical polymer body withstands up to 145 psi operating pressure
  • Meter-out design regulates exhaust flow from 0 to 63.6 cfm
  • Nickel-plated finish resists corrosion across 0 to 70 °C range

Specifications

TypeDrain Components
BrandLegris
Model7065 10 17

Questions about this item

What comes with the 7065 10 17 flow control and what extra parts are needed?

The unit is a complete compact flow-control valve with an R 3/8 in BSPT male thread and a 10 mm push-to-connect tube port. No extra fittings are required if your circuit matches those connections.

Which version of the 7065 10 17 should I select for meter-out control?

This specific part number is the meter-out variant; the adjustment screw regulates exhaust flow from the actuator. Choose it when you need to throttle the outgoing air.

What does the 63.6 cfm maximum flow mean in practice?

At 145 psi supply pressure the valve can pass up to 63.6 cfm through the 10 mm tube connection, so size your upstream compressor and tubing accordingly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.