We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass flow-control valve with 6 mm push-to-connect inlet and 1/8 BSPP outlet

Legris

Legris 7060 06 10 flow control trap 6mm push-to-connect 1/8 BSPP 145 psi 158°F

SKU CH-569F-AQHH5 MPN 7060

Flow control valve with 6 mm push-to-connect inlet, 1/8 BSPP outlet, 145 psi maximum pressure and 158 °F temperature rating

  • TypeDrain Components
  • MaterialHAWA
  • Precise flow regulation from 14.5 to 145 psi
  • Quick 6mm push-to-connect inlet for fast assembly
  • 1/8 BSPP outlet threads into standard ports
  • Withstands 158°F and 145 psi max pressure
  • 360° rotation simplifies alignment in tight spaces

Flow Control Valve 6 mm Push-to-Connect 1/8 BSPP

This flow control valve regulates pneumatic flow in a single direction. It accepts a 6 mm push-to-connect tube at the inlet and a 1/8 BSPP thread at the outlet. The body is constructed from HAWA material and provides 360-degree rotation for flexible installation.

Installers needing in-line speed control on 6 mm

The valve suits pneumatic circuits that require adjustable flow between 14.5 and 145 psi at temperatures up to 158 °F. It is not suited for applications demanding bi-directional regulation, higher pressure ratings, larger tube diameters, or different port thread standards.

6 mm push-to-connect inlet with 1/8 BSPP outlet

This port combination determines whether the valve fits the existing tubing and threaded port in the circuit. Verify both the tube outer diameter and the thread specification before ordering.

Highlights

  • Precise flow regulation from 14.5 to 145 psi
  • Quick 6mm push-to-connect inlet for fast assembly
  • 1/8 BSPP outlet threads into standard ports
  • Withstands 158°F and 145 psi max pressure
  • 360° rotation simplifies alignment in tight spaces

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model7060 06 10

Questions about this item

What size tubing and thread do I need to connect this 7060 flow control trap?

The valve inlet accepts 6mm push-to-connect tubing and the outlet uses a 1/8 BSPP thread, so both must be present in your pneumatic circuit.

Will this regulator work with my existing 14.5 to 145 psi pneumatic system?

Yes, its pressure range is 14.5 to 145 psi and the maximum rating is 145 psi, matching common shop air supplies within those limits.

How can I verify the trap is operating correctly after installation?

Confirm air flows in the controlled direction, the adjustment knob rotates through 360 degrees, and the system stays below 158°F during use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.