Legris
Legris 7045 56 11 Flow Control Regulator trap
A flow-control regulator that limits pneumatic flow in one direction through a 1/4 in push-to-connect inlet and 1/8 in NPT outlet, rated to 145 psi and 158 °F
- TypeDrain Components
- MaterialHAWA
- Precise flow adjustment with 14.5 to 145 psi range
- Push-to-connect 1/4 in inlet speeds installation
- 1/8 in NPT outlet fits standard pneumatic fittings
- Operates up to 158 °F for demanding environments
- Rated to 145 psi maximum pressure for reliability
Flow control regulator for pneumatic lines
The Legris 7045 56 11 regulates airflow in one direction with a 1/4 inch push-to-connect inlet and a 1/8 inch NPT outlet. It operates between 14.5 and 145 psi and withstands temperatures up to 158 degrees F. The valve body uses HAWA material for industrial durability.
Suited for single-direction speed control
This unit fits circuits that need adjustable flow in one direction only. It is not for applications requiring bi-directional regulation or higher pressure ratings than 145 psi. Buyers needing different port thread types should look at other models.
Maximum working pressure 145 psi
The 145 psi ceiling decides whether the regulator matches the system pressure. Exceeding this limit risks leakage or component failure. Verify the circuit pressure before installing the 7045 56 11.
Highlights
- Precise flow adjustment with 14.5 to 145 psi range
- Push-to-connect 1/4 in inlet speeds installation
- 1/8 in NPT outlet fits standard pneumatic fittings
- Operates up to 158 °F for demanding environments
- Rated to 145 psi maximum pressure for reliability
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Brand | Legris |
| Model | 7045 56 11 |
Questions about this item
Will the 7045 56 11 regulator connect to my existing 1/4 in push-to-connect tubing and 1/8 in NPT fittings?
The valve inlet port is 1/4 in push-to-connect and the outlet port is 1/8 in NPT, matching those exact fitting types.
How can I verify the 7045 56 11 is regulating flow correctly once installed?
The pressure range is 14.5 to 145 psi; use a gauge to confirm outlet pressure falls within this span during operation.
Does the 7045 56 11 package include tubing or thread sealant, or must I buy them separately?
The product is the flow control regulator only; tubing and thread sealant are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Inch Screw-in Round Floor Drain Cover Black 108mm 304 Stainless Steel 1.8mm
$30.99
0.00036176BTC
In stock