We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Legris 7040 flow control valve brass body screwdriver adjustment 10mm push connect 1/4 BSPP outlet

Legris

Legris 7040 10 13 Flow Control Valve 145 psi

SKU CH-Y2G4-7C2CS MPN 7040

A screwdriver-adjusted flow control valve with a 10 mm push-to-connect inlet, 1/4 in BSPP outlet, 14.5–145 psi range, 158 °F maximum temperature and 360° rotation

  • TypeDrain Components
  • Precise flow adjustment via 360-degree screwdriver control
  • Secure 10 mm push-to-connect inlet for quick installation
  • Reliable 1/4 in BSPP outlet ensures leak-free connection
  • Operates safely from 14.5 to 145 psi pressure range
  • Withstands temperatures up to 158 degrees F

Flow Control Valve for Pneumatic Systems

The Legris 7040 10 13 regulates airflow in pneumatic circuits with a maximum pressure rating of 145 psi. It accepts a 10 mm push-to-connect inlet and a 1/4 in BSPP outlet. The valve operates between 14.5 and 145 psi at temperatures up to 158 Degrees F.

Installers needing inline flow adjustment

Technicians who require a screwdriver-adjustable valve with 360-degree rotation for fine control will find this model suitable. It is not intended for applications exceeding the stated pressure or temperature limits, nor for media incompatible with the valve materials.

10 mm push-to-connect inlet with 1/4 in BSPP outlet

The mixed port configuration determines whether this valve fits the existing tubing and thread standards in the system. Verify both connection types before purchase to ensure compatibility.

Highlights

  • Precise flow adjustment via 360-degree screwdriver control
  • Secure 10 mm push-to-connect inlet for quick installation
  • Reliable 1/4 in BSPP outlet ensures leak-free connection
  • Operates safely from 14.5 to 145 psi pressure range
  • Withstands temperatures up to 158 degrees F

Specifications

TypeDrain Components
BrandLegris
Model7040 10 13

Questions about this item

How often should the 10 mm push-to-connect inlet and 1/4 in BSPP outlet fittings be inspected or replaced?

Inspect the push-to-connect and BSPP fittings during routine pneumatic system maintenance; replace any fitting that shows wear, cracking or leakage to maintain the 145 psi pressure rating.

What is the first limit reached when the valve runs continuously at the 145 psi maximum pressure?

The 158 °F maximum temperature rating is the primary thermal limit; sustained operation at 145 psi must stay below this temperature to avoid seal degradation.

How much heat does the valve generate during all-day operation at 145 psi?

The valve body itself generates minimal heat; system temperature is governed by the compressed air supply and must remain under the 158 °F maximum operating temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.