We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Legris 7010 flow control valve with 8 mm push-to-connect inlet and 3/8 BSPP outlet

Legris

Legris 7010 08 17 Flow Control Valve 8 mm 3/8 BSPP 145 psi

SKU CH-7D0W-6WAPC MPN 7010

Flow control valve with 8 mm push-to-connect inlet and 3/8 in BSPP outlet rated 14.5 to 145 psi

  • TypeDrain Components
  • MaterialHAWA
  • Precise flow adjustment with screwdriver control
  • 8 mm push-to-connect inlet for quick tubing attachment
  • 3/8 in BSPP outlet fits standard pneumatic fittings
  • Operates from 14.5 to 145 psi across varied systems
  • Withstands up to 158 °F and full 360° rotation

Flow Control Valve Specifications

The Legris 7010 08 17 is a pneumatic flow control valve that regulates airflow in one direction. It connects an 8 mm push-to-connect inlet to a 3/8 in BSPP outlet. The valve operates within a pressure range of 14.5 to 145 psi and withstands temperatures up to 158 degrees F. A screwdriver adjustment provides precise metering for automated systems.

Suitable Applications

This valve suits pneumatic circuits requiring regulated flow from metric tubing to a BSPP port. It fits machine builders needing 360-degree rotational alignment during installation. Buyers who require bi-directional flow control or a different thread standard should look at other valve types. Systems exceeding the 145 psi maximum pressure rating need a higher-rated component.

Critical Pressure Rating

The maximum operating pressure is 145 psi, and this single figure determines whether the valve matches the circuit design. Exceeding this limit risks seal failure and unsafe operation. Verify the system pressure stays within the 14.5 to 145 psi range before selecting this part.

Highlights

  • Precise flow adjustment with screwdriver control
  • 8 mm push-to-connect inlet for quick tubing attachment
  • 3/8 in BSPP outlet fits standard pneumatic fittings
  • Operates from 14.5 to 145 psi across varied systems
  • Withstands up to 158 °F and full 360° rotation

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model7010 08 17

Questions about this item

What size push-to-connect tubing must I already have for the 8 mm inlet?

The valve inlet is an 8 mm push-to-connect port, so you need 8 mm outer-diameter pneumatic tubing that matches that fitting.

Will the 3/8 in BSPP outlet thread directly into my existing BSPP port?

Yes, the outlet is a 3/8 in BSPP thread, so it will mate with any standard 3/8 in BSPP female port you are keeping.

How can I confirm the valve is regulating flow within the 14.5 to 145 psi range after installation?

Install a pressure gauge downstream; the needle should stay between 14.5 and 145 psi while the valve handle rotates through its 360-degree range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.