Legris 7010 06 19 Flow Control Regulator 6mm

Legris 7010 Flow Control Regulator

This pneumatic flow control regulator manages air flow in one direction through a 6mm push-to-connect inlet and an M5 x 0.8 outlet. It suits automation engineers and maintenance technicians who need precise speed control on single-acting cylinders or similar actuators. The valve operates up to 145 psi and handles temperatures up to 158 degrees F.

Adjustable Knurled Knob With 360 Rotation

The regulator includes a knurled adjustment knob that provides 360 degrees of rotation for fine metering across the 14.5 to 145 psi pressure range. This continuous turn design lets operators dial in exact flow rates without discrete steps, reducing setup time on test benches or production lines where repeatable actuator speed matters.

Push-to-Connect Inlet Simplifies Installation

The 6mm push-to-connect inlet accepts compatible tubing without tools, while the M5 x 0.8 male thread secures to the port. Ensure tubing is cut square and fully seated to prevent leaks; the most common issue is insufficient insertion depth. Verify the thread seal on the M5 side matches the port specification to avoid cross-threading or pressure loss.