We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Legris 7010 06 10 flow control regulator, 6mm push-to-connect inlet, 1/8 BSPP outlet, compact metal body

Legris

Legris 7010 06 10 Flow Control Regulator 6mm

SKU CH-GK94-353BG MPN 7010

A 6 mm push-to-connect flow control regulator with 1/8 in BSPP outlet, 14.5 to 145 psi range and 158 °F maximum temperature

  • TypeDrain Components
  • MaterialHAWA
  • Precise flow adjustment with 360-degree rotation
  • 6 mm push-to-connect inlet for quick tubing setup
  • 1/8 in BSPP outlet fits standard pneumatic ports
  • Operates from 14.5 to 145 psi for versatile pressure control
  • Withstands up to 158 °F in demanding environments

Legris 7010 06 10 Flow Control Regulator

The Legris 7010 06 10 is a pneumatic flow control regulator designed for fluid power systems. It suits engineers and maintenance technicians who need precise speed control on actuators. The valve body uses HAWA material for durability in compressed air circuits. This component manages flow in a single direction only.

6mm Push-to-Connect Inlet with 1/8 BSPP Outlet

The critical specification is the port configuration: a 6 mm push-to-connect inlet paired with a 1/8 inch BSPP threaded outlet. This mismatch means the regulator only fits lines built for that exact combination. The pressure range runs from 14.5 to 145 psi with a maximum temperature of 158 degrees F. Verify both port types before ordering.

360-Degree Rotation Eases Alignment

The adjustment knob rotates a full 360 degrees, letting you orient the outlet port without stressing the tubing. Push the 6 mm tube firmly into the inlet until it seats; a loose fit causes leaks under pressure. The BSPP outlet requires a bonded seal or O-ring — thread tape alone often weeps. Confirm flow direction arrow matches circuit design.

Highlights

  • Precise flow adjustment with 360-degree rotation
  • 6 mm push-to-connect inlet for quick tubing setup
  • 1/8 in BSPP outlet fits standard pneumatic ports
  • Operates from 14.5 to 145 psi for versatile pressure control
  • Withstands up to 158 °F in demanding environments

Specifications

TypeDrain Components
MaterialHAWA
BrandLegris
Model7010 06 10

Questions about this item

What does the 145 psi maximum pressure rating mean for everyday pneumatic use?

It sets the highest safe operating pressure for the regulator in a compressed-air system; running above 145 psi can damage the valve or cause leaks.

How does the 1/8 in BSPP outlet port limit the fittings I can use?

Only components with a matching 1/8 in BSPP thread will seal directly; other thread types need an adapter before they can be connected.

What clearance does the 6 mm push-to-connect inlet need for tube insertion?

The 6 mm port accepts standard 6 mm OD pneumatic tubing with a straight push; allow enough space behind the fitting for the tube to seat fully without sharp bends.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.